1. Attachments are working again! Check out this thread for more details and to report any other bugs.

How to Change Front Map Lights.

Discussion in 'Gen 4 Prius Accessories and Modifications' started by eight08customs, Jan 27, 2016.

  1. eight08customs

    eight08customs Senior Member

    Joined:
    Nov 2, 2009
    245
    583
    0
    Location:
    Hawaii
    Vehicle:
    2016 Prius
    Model:
    Two
    [​IMG]

    Changing the map lights on the 2016 Prius is pretty tricky. Those that owed the older Prius the new model is much more difficult and you have to be very careful because it requires some prying of some skinny fragile plastic pieces.

    Photo 1 I advise to use a plastic pry tool but a screw driver will do just be very careful

    [​IMG]



    [​IMG]

    Photo 2 and 3
    As you can see that the bezel is held in by clips. Its pretty hard to pry and be careful becuase some areas of the bezel is very skinny

    [​IMG]

    Photo 4
    This is the bezel off the housing

    [​IMG]

    Photo 5
    Now the Clear Lens can be removed. This is also held in by clips. Be very careful it pretty hard to come off.

    [​IMG]

    [​IMG]

    Photo 6 and 7
    Clear Lens Off

    [​IMG]

    [​IMG]

    [​IMG]

    I Choose to use a more expensive T10 LED bulb from JAPAN made by MODE PARFUME
    These don't shine blue like the EBAY LEDS and are way Brighter

    [​IMG]

    [​IMG]
     
    pjm877, RaleighChuck, Plus IV and 4 others like this.
  2. glennonrp

    glennonrp Active Member

    Joined:
    Jan 31, 2016
    178
    199
    0
    Location:
    Fontana, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    I used this post tonight to change my map lights too. Thank you for posting it. I also changed the dome light, cargo area light, and two door lights for LEDs as well. So much better looking.


    iPhone ?
     
  3. stamperman

    stamperman New Member

    Joined:
    Mar 13, 2016
    4
    1
    0
    Location:
    alma, arkansas
    Vehicle:
    2016 Prius
    Model:
    Two
    i did this same change in my prius two. one thing to be very careful of; the silver reflective shields for the maplights have some very sharp edges. i sliced my finger pretty good trying to get the first bulb out!
     
  4. janman

    janman Junior Member

    Joined:
    Aug 25, 2012
    6
    9
    0
    Location:
    Warner Robins Ga
    Vehicle:
    2018 Prius
    Model:
    Four
    thanks for the post, I was able (with help from your post) to change map, door, cargo, and vanity lights. without the help of this forum I would probably never attempt to do anything to my Prius
     
    krmcg likes this.
  5. glennonrp

    glennonrp Active Member

    Joined:
    Jan 31, 2016
    178
    199
    0
    Location:
    Fontana, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    To stamperman and janman:

    Out of curiosity, what kind of LED bulbs did you use?

    I'm also thinking of trying to use LEDs when the exterior bulbs burn out, like turn signals or back up lights.
     
  6. janman

    janman Junior Member

    Joined:
    Aug 25, 2012
    6
    9
    0
    Location:
    Warner Robins Ga
    Vehicle:
    2018 Prius
    Model:
    Four
    I used 194 LED Light bulbs (T10) by Yorkim, color white from Amazon $12.99 for ten (10)
     
  7. glennonrp

    glennonrp Active Member

    Joined:
    Jan 31, 2016
    178
    199
    0
    Location:
    Fontana, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    I'm almost certain those are the same ones I bought. I like them!
     
  8. ucla107

    ucla107 Member

    Joined:
    Mar 6, 2016
    98
    107
    3
    Location:
    Los Angeles, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    Thanks for the post. This REALLY is a royal pain in the nice person... I consider myself very handy but still managed to break a couple of the tabs... Used both a plastic pry bar and screwdriver but I found that using an old credit card really helped too... And knowing where exactly the tabs are. I'd recommend starting from the back side (closer to the windshield) because those tabs are thinner than the ones up front


    Ahhhh MUCH better
     
    Vintage Pep and glennonrp like this.
  9. krmcg

    krmcg Lowered Blizzard Pearl Beauty

    Joined:
    May 15, 2008
    2,592
    2,390
    0
    Location:
    Whittier, CA
    Vehicle:
    2016 Prius
    Model:
    Four
    I ordered some bulbs and am going to try this next week. Did you find the light that supposedly shines on the shift knob?
     
  10. glennonrp

    glennonrp Active Member

    Joined:
    Jan 31, 2016
    178
    199
    0
    Location:
    Fontana, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    I didn't break any tabs. I may have been lucky, or more patient. I just kept wiggling the plastic pry tool around and moving to different spots until I got them to pop out. It took a long time, I'm guessing around 15 mins, just to get the opaque plastic frame off. Then, I'm embarrassed to say, I spent far too long trying to figure out why the bulb on the left wouldn't turn off even with the door closed and the main switch set to off. I had hit the map light switch in removing the frame. I am not a smart man sometimes.

    I went on to change the bulbs in the dome, doors, vanity mirrors, and the cargo area. It makes a big difference and looks awesome.
     
    krmcg likes this.
  11. glennonrp

    glennonrp Active Member

    Joined:
    Jan 31, 2016
    178
    199
    0
    Location:
    Fontana, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    That's a small LED in the roof by the map lights. I didn't try changing that. I felt it was already bright enough. It's not very bright, but I kinda thought it would be distracting at night if it was brighter. It does a good enough job highlighting the area of the shifter and Qi charger (that I don't use).

    Off topic but I hope an aftermarket part appears that allow us to remove the Qi charger and replace that are with more useful space.
     
  12. krmcg

    krmcg Lowered Blizzard Pearl Beauty

    Joined:
    May 15, 2008
    2,592
    2,390
    0
    Location:
    Whittier, CA
    Vehicle:
    2016 Prius
    Model:
    Four
    I cut some soft black shelf-lining material to size and laid it in the space (made layers to get it "even" on the top layer. Keeps anything from rattling and looks pretty good.
     
    glennonrp likes this.
  13. glennonrp

    glennonrp Active Member

    Joined:
    Jan 31, 2016
    178
    199
    0
    Location:
    Fontana, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    That's a possibility. But, I am guessing the circuitry for the charger takes up some room. I would like something that reclaims that space and looks OEM, if possible. It's not a big deal right now. And I'm not sure my own skills are up to fabricating anything at this time. So I will be patient and see what happens.
     
    krmcg likes this.
  14. ucla107

    ucla107 Member

    Joined:
    Mar 6, 2016
    98
    107
    3
    Location:
    Los Angeles, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    Would be cool if someone can 3D print something :)
     
    glennonrp and krmcg like this.
  15. tahlpaul

    tahlpaul Junior Member

    Joined:
    Mar 21, 2005
    7
    9
    0
    Location:
    Chicagoland, USA
    Vehicle:
    2016 Prius
    Model:
    Four
    Thought I would add these for those with the sunroof. These pics were taken of my Four with the Advanced Technology Package. I must say, I was pleasantly surprised at how easy it was compared to the process in the first post. Just four mount points to pop out (in red in the pic below) and the bulbs are in sockets that take just 1/8 of a turn to free them. Pictures show pretty much everything you need to know.

    Overhead assembly 1.jpg assembly side.jpg Bulb in socket.jpg Overhead opening.jpg Finished product.jpg
     
  16. krmcg

    krmcg Lowered Blizzard Pearl Beauty

    Joined:
    May 15, 2008
    2,592
    2,390
    0
    Location:
    Whittier, CA
    Vehicle:
    2016 Prius
    Model:
    Four
    Thanks everyone for the instructions and the courage to do this upgrade. Worked for me with just a little elbow grease. Nice white light now.
     
    glennonrp likes this.
  17. glennonrp

    glennonrp Active Member

    Joined:
    Jan 31, 2016
    178
    199
    0
    Location:
    Fontana, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    Did you only change the map lights? I had to change all of them. I couldn't stand seeing the yellow light of incandescent bulbs with the pure white LEDs.
     
  18. krmcg

    krmcg Lowered Blizzard Pearl Beauty

    Joined:
    May 15, 2008
    2,592
    2,390
    0
    Location:
    Whittier, CA
    Vehicle:
    2016 Prius
    Model:
    Four
    I took the cover off of the center light, but it seemed to require a different type of bulb. So I retreated.
     
    glennonrp likes this.
  19. glennonrp

    glennonrp Active Member

    Joined:
    Jan 31, 2016
    178
    199
    0
    Location:
    Fontana, CA
    Vehicle:
    2016 Prius
    Model:
    Four Touring
    It does. But it's a standard type of "dome light" bulb. I forget which its called. I got a LED type and replaced it. However, the other lights in the car take the same bulb as the map lights. So, you can replace the two vanity mirror lights, the two in the bottom of the front doors, and the rear cargo light with the LEDs you already have.
     
    krmcg likes this.
  20. krmcg

    krmcg Lowered Blizzard Pearl Beauty

    Joined:
    May 15, 2008
    2,592
    2,390
    0
    Location:
    Whittier, CA
    Vehicle:
    2016 Prius
    Model:
    Four
    Thanks. Will do!
     
    glennonrp likes this.