1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Prius Hardware for brakes

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by alex rodriguez, Jun 3, 2016.

  1. alex rodriguez

    alex rodriguez Junior Member

    Joined:
    Oct 21, 2014
    39
    7
    0
    Location:
    Phoenix,AZ
    Vehicle:
    2008 Prius
    Model:
    N/A
    The little metal hardware pieces for my brakes since I've had the car they have broken three times within a year recently. A mechanic who was the last to replace them said the brake pads were fine and wasn't sure why they keep breaking. Going to add a picture of the piece I'm talking about.

    When driving my Prius when below 40mph the two front tire area makes an awful clanking sound because of the hardware breaking. Anyone know what the deal is or how to have a permanent fix? Thank you for advice :)

    The link of the picture of what I'm talking about that keeps breaking :(

    http://www.carid.com/images/carlson/brake-parts/13582q.jpg
     
  2. Starship_Enterprius

    Starship_Enterprius Active Member

    Joined:
    Aug 11, 2014
    312
    152
    0
    Location:
    Ottawa, Ontario
    Vehicle:
    2018 Prius Prime
    Model:
    Premium
    brake shims.

    Sorry I have a 2010 so not sure what's the deal with the 2nd gen. When I replaced mine this year, 2 of my shims were missing (one on each side) but it wasn't making any noise before that.

    Are you using original brake parts (pads, shims, rotors)? In my previous cars (non hybrid), I usually went cheap and bought aftermarkets. This is the 1st time I bought OEM and the fit is beautiful compared to the aftermarkets.

    Here's a pic I found on the internet for 2nd Gen. They look very similar to mine when I replaced them.

    First Brake Job at 86K Miles - 2004 Toyota Prius Long-Term Road Test

    I usually put some sticky gooey stuff (forgot the name) between the shims and the pads and the calipers to keep them quiet and also help hold them in place. Ask your mechanic to add them next time, it might help keep things quiet and in place.
     
    #2 Starship_Enterprius, Jun 3, 2016
    Last edited: Jun 3, 2016
    alex rodriguez likes this.
  3. alex rodriguez

    alex rodriguez Junior Member

    Joined:
    Oct 21, 2014
    39
    7
    0
    Location:
    Phoenix,AZ
    Vehicle:
    2008 Prius
    Model:
    N/A
    I will need to let the know pretty soon because the noise makes me feel like my car is falling apart and I hate how loud it is when driving by people at stores and down the neighborhood. Thank you for the response. The whole brake area is something I have trouble understanding :)
     
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    how many miles on her? my '08 brakes with 100k are like brand new.
     
  5. alex rodriguez

    alex rodriguez Junior Member

    Joined:
    Oct 21, 2014
    39
    7
    0
    Location:
    Phoenix,AZ
    Vehicle:
    2008 Prius
    Model:
    N/A
    128k but when the last mechanic who replaced the broken hardware was working on it I asked him if i needed new brakes and he said know they were like new still. I wanted to take it to the dealer but they said it would be 240$ just to inspect plus addition $ for pieces and extra labor :( why I've been sticking to local mechanics. I just don't know why they keep breaking :(
     
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    some dealers only charge an hour's labor for inspection, shop around. i know it's expensive, but it sounds like your mechanic is doing something wrong.
     
    tvpierce likes this.
  7. Currahee

    Currahee Member

    Joined:
    Apr 9, 2016
    103
    33
    0
    Location:
    CT
    Vehicle:
    2007 Prius
    Model:
    II
    For comparison, these are the OEM shims:

     
  8. alex rodriguez

    alex rodriguez Junior Member

    Joined:
    Oct 21, 2014
    39
    7
    0
    Location:
    Phoenix,AZ
    Vehicle:
    2008 Prius
    Model:
    N/A
    this is the thing that keeps breaking, is this also a shim? just confused sorry :)
    [​IMG]
     
  9. howardc64

    howardc64 Member

    Joined:
    Nov 11, 2011
    89
    36
    0
    Location:
    Pacific Northwest
    Vehicle:
    2011 Prius
    Model:
    Two
    These are just the shims that brake pads slide on as the pads get squeezed and unsqueezed when you step on and release the brakes. The shims form fits on the bracket perfectly and the depressed channel is where the brake pad ears go into and slide in. Assuming the shims are installed correctly, maybe the pads are getting cockeyed at an angle and jammed somehow bending/breaking the shims.

    A common problem on Toyota brake caliper designs is frozen caliper slide pins. If yours haven't been lubricated recently, you might check that. I did a whole writeup on why these caliper slide pins tend to freeze compared to other designs. If the pins are frozen, I can imagine uneven forces on the pads and causing all kinds of problems.

    Brake Caliper Slide Pin Cleaning and Lubrication | Page 5 | PriusChat
     
    #9 howardc64, Jun 3, 2016
    Last edited: Jun 3, 2016
    Starship_Enterprius likes this.
  10. tvpierce

    tvpierce Senior Member

    Joined:
    Apr 27, 2015
    949
    878
    2
    Location:
    Maine
    Vehicle:
    2013 Prius v wagon
    Model:
    Five
    +1

    There's nothing out of the ordinary about the brake pads & calipers on this car -- any mechanic should be able to service them like they would any other car.

    Did your mechanic indicate which parts in the hardware package are breaking? The 4 "bracket" pieces on the left, or the 4 "wire spring" pieces on the right?
     
  11. Kenny94945

    Kenny94945 Active Member

    Joined:
    Mar 24, 2016
    758
    387
    0
    Location:
    Sausalito
    Vehicle:
    2016 Prius v wagon
    Model:
    Four
    Well I am confused reading this thread.
    OP posted a full brake part picture.

    What part is breaking?
    The silver metal springs?
    The copper metal retainers?

    I can't see the retainers breaking? If this... something is very wrong.
    The springs, I could see breaking if the parts were reused or somehow bent (even stepped on) during installation.

    Anyway, an inspection is needed...plus I don't think these parts are sold separately so you'll have to buy a set of pads.
    From the OP writing (breaking 3x) ...I'd guess there is an installation error or cheap metal/ non OEM parts used.

    Well, good luck.
     
  12. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,072
    14,975
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV


    There are enough strange things about this thread that it is hard to be sure what to say next.

    The original poster's profile says a 2008 Prius (Gen 2) in USA, which ought to be the model with rear drums, and disc brakes on the front only.

    At the same time, the photo link the original poster supplied looks like the fitting kit (not the shim kit) for the rear disc brakes (as one would expect to see on Gen 3, or maybe some non-USA Gen 2s).

    Maybe that's just a mixup in posting, or maybe some mechanic has been trying to use Gen 3 rear fitting kits on the front calipers of a Gen 2. I could imagine that causing some issues.

    The shims are the flat metal pieces that are stacked alongside the pads (between one pad and the piston, between the other pad and the mounting), coated with shim grease. 2008 front disc brake shim kit

    The fitting kits are the sproingy metal pieces that fit into the notches in the mounting above and below, that the ears of the pads slide in. 2008 front disc brake fitting kit

    If the problems have been occurring while using parts that are not those specific, Toyota parts, I would go ahead and try those specific parts and see what happens.

    Or ... does the OP have a newer Prius and an outdated profile?

    -Chap