1. Attachments are working again! Check out this thread for more details and to report any other bugs.

ABS, VSC, PARKING break stay activated

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by camerond, Jun 28, 2016.

Tags:
  1. camerond

    camerond Junior Member

    Joined:
    Oct 7, 2013
    6
    1
    0
    Vehicle:
    2006 Prius
    Model:
    II
    Hello all,

    Today I took my 2006 Toyota Prius with 167,000 miles out to drive my dog to the vet. I turned the car on and deactivated the parking break and noticed the light stayed on, then I noticed the VSC and ABS lights stayed on as well.

    My car was parked backwards on a driveway incline for about 14 hours. My 12v battery is old, not sure what shape it is in. The hybrid battery was replaced 2 years ago. I have been reading up and i guess it could be a sensor, skid sensor, 12v battery, or some sort of pump. Also, my parking break has felt a little weak as of late.

    The car still drives, not sure if it drives funny or psychologically I think it does.

    Thanks!
     
    #1 camerond, Jun 28, 2016
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Go have it checked out, there is an extended warranty for the actuator pump, which has those brake indicators you mentioned
     
    #2 JC91006, Jun 28, 2016
  3. camerond

    camerond Junior Member

    Joined:
    Oct 7, 2013
    6
    1
    0
    Vehicle:
    2006 Prius
    Model:
    II
    Call me ignorant, but how do I check to see if I qualify for the actuator pump extended warranty.

    Thanks
     
    #3 camerond, Jun 28, 2016
  4. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Just by having a 2006 model. You should have received something in the mail

    This is assuming your hv battery is ok
     
    #4 JC91006, Jun 28, 2016
  5. camerond

    camerond Junior Member

    Joined:
    Oct 7, 2013
    6
    1
    0
    Vehicle:
    2006 Prius
    Model:
    II
    I have moved and I think it might have sent to my old address if they sent it. I tried to go to the website and add my vin but I haven't seen anything about it on there.

    I will call them.

    Thank you
     
    #5 camerond, Jun 28, 2016
  6. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    It's not a recall, it's an extended warranty......in case you encounter the problem
     
    #6 JC91006, Jun 28, 2016
  7. TheNovice

    TheNovice New Member

    Joined:
    Feb 1, 2016
    7
    2
    0
    Location:
    Ireland
    Vehicle:
    2008 Prius
    Model:
    Two
    Hey guys.

    Hopefully the OP doesn't mind me jumping into his thread! I have the same warning lights appearing and feel another thread would be overkill.

    Anyways I have the red triangle, ABS and VSC lights staying on. I also noticed that the LED that comes on when the "self park" is activated is flashing as opposed to being constantly on, and the cruise control no longer works!

    I've changed the 12V battery, and it wasn't that.

    I've bought an OBDII dongle, plugged it in, downloaded the Torque App on Android and got the following results....

    -------------------------------------------------------------------------------------
    Vehicle VIN: Not present
    Vehicle Manufacturer: Unknown
    Vehicle Calibration ID: 34712100

    Test report:
    ------------------
    MID:$01 TID:$8e
    - O2 Bank 1 Sensor 1
    Test incomplete or dependant test failed
    --
    MID:$01 TID:$91
    - O2 Bank 1 Sensor 1
    Test incomplete or dependant test failed
    --
    MID:$02 TID:$07
    Minimum sensor Voltage for test cycle(calculated) - O2 Bank 1 Sensor 2
    Test incomplete or dependant test failed
    --
    MID:$02 TID:$08
    Maximum sensor Voltage for test cycle(calculated) - O2 Bank 1 Sensor 2
    Test incomplete or dependant test failed
    --
    MID:$02 TID:$8f
    - O2 Bank 1 Sensor 2
    Test incomplete or dependant test failed
    --
    MID:$01 TID:$8e
    - O2 Bank 1 Sensor 1
    Test incomplete or dependant test failed
    --
    MID:$01 TID:$91
    - O2 Bank 1 Sensor 1
    Test incomplete or dependant test failed
    --
    MID:$02 TID:$07
    Minimum sensor Voltage for test cycle(calculated) - O2 Bank 1 Sensor 2
    Test incomplete or dependant test failed
    --
    MID:$02 TID:$08
    Maximum sensor Voltage for test cycle(calculated) - O2 Bank 1 Sensor 2
    Test incomplete or dependant test failed
    --
    MID:$02 TID:$8f
    - O2 Bank 1 Sensor 2
    Test incomplete or dependant test failed
    --

    End of report.
    ------------------------------------------------------------------------------------------------

    Strangely, bank 1 sensor 2, which shows as a fail above, is the only thing that gives a "live" graph when the engine is running. Every other sensor in both banks gives a blank graph.
    So does this mean both sensors are gone, or does it mean the cat is acting up?

    Thanks in advance.

    Larry.
     
    #7 TheNovice, Jun 28, 2016
  8. goldfinger

    goldfinger Active Member

    Joined:
    Mar 12, 2012
    535
    402
    0
    Location:
    Buffalo
    Vehicle:
    2016 Prius
    Model:
    Three
    Could be a bad wheel speed sensor. Could also be allot of other things. I had all the same lights and it turned out to be a rear bearing had gone. When it starts to go it destroys the speed sensor.
     
    #8 goldfinger, Jun 29, 2016
  9. camerond

    camerond Junior Member

    Joined:
    Oct 7, 2013
    6
    1
    0
    Vehicle:
    2006 Prius
    Model:
    II
    JC91006, I appreciate your help.

    Sorry, I never thanked you for your reply.

    The problem ended up not being the brake actuator. Apparently a rat got into the underside compartment and chewed up some wires.

    $295.00 repair to re-solder the connections.
     
    #9 camerond, Oct 31, 2016
    fotomoto likes this.
(You must log in or sign up to post here.)