What did you do to ur Gen III Prius today????

Serious drooling here! Where can I get ones?

 

Hybridpit.com

 

What is the consequence of failing this safety inspection? Are they refusing to do warranty work?

 

Yeah I would be interested to know as well. Also, did you tint your taillights with a laminate or did you install a pair of "smoked" jdm tail lights?

I am about to install some smoked spec-d taillights myself and wonder if there is any sort of legal difference between those two.


iPad ?

 

They are tinted with the lamin-x stuff.

In PA, car inspections are required annually to get your tags renewed. Failing doesn't affect any of my warranty stuff, those things aren't connected. It's just the waste of time and money to prove you have lights, blinkers and you aren't polluting.

I try again on Friday. Fingers crossed!

 

This BirdsEye project is the type of mod that just keeps on keepin' on.

Today was calibration day.

The first time I powered it all up it looked like this.



... and I'm thinking, "That's it?"

Firstly, I needed to make sure the side cameras were physically rotated to the correct orientation. Otherwise, the software calibration procedure is meaningless.

Once all the cameras are oriented correctly, commence software calibration:

​

NO MORE CURB RASH ANXIETY ​

​

 

Not that I really did it today (brrrr!), but some weather is just more inviting to sit down indoors and write up old projects.

I'm sorry to report it doesn't change the stock look at all, but sometimes it's handy to have a little air on board, whether for topping up tires, blowing gradoo out of tight spaces, or (light) air tool use.

-Chap

 

i'm new member with bad english

I installed aftermarket seat heater kit. I put heater controller in very nice location

 

Love to see more of your car interior. Please post!

 

Same here. I've never seen leather on the center console like that.

 

Nice, what did you do here? A better rear cam? What kind of receiver is that?

 

Yes, swapped out the camera with a new one. The receiver is Pioneer 6100NEX

 

Got a chance to change out my front emblem. Fit perfectly

 

Happiness is...driving 700 miles to get these...

Enkei PF-01's....stay tuned to be continued....

 

What size did you get? 17x7, 45mm offset? Damn, 700 miles that one way or both way?

 

225.40.18 tires on 18x7.5 45 offset rims Long Beach to San Jose...350 miles one way!
Worth the drive near perfect !

 

You will love the fitment

 

oooo...now I know what I got...thanks Ehtisham for the pics...

 

SO do you have the same wheels?...I might need a camber kit to stay low..since I have Airrex struts!

 

Actually mines are PF01 17x7.5 45 offset. No rubbing whatsoever without fenders rolled. Lowered on tein coilovers