1. Attachments are working again! Check out this thread for more details and to report any other bugs.

How to get behind front bumper to push out dent

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by TryingToLearn, Aug 4, 2017.

  1. TryingToLearn

    TryingToLearn Junior Member

    Joined:
    Sep 21, 2014
    5
    0
    0
    Location:
    santa monica, ca
    Vehicle:
    2008 Prius
    Model:
    N/A
    Hello, I have a dent on the right hand side of my 2010's front bumper.

    I've watched countless videos of people heating up their bumpers and then pushing the dent out from the inside. I can't for the life of me, however, find instructions on how to remove the black flaps under the car to get access into the bumper. Any tips would be very appreciated!

    Pics below of the area I'm talking about, plus the dent. I'm a broke student, so taking it to a repair shop for $400-$1000 repair isnt an option for me. :(
     

    Attached Files:

    #1 TryingToLearn, Aug 4, 2017
  2. NutzAboutBolts

    NutzAboutBolts Senior Member

    Joined:
    Mar 5, 2013
    1,476
    1,552
    0
    Location:
    Bay Area
    Vehicle:
    2012 Prius
    Model:
    Four
    The bottom plastic piece is held on by a bunch of clips and screws. You can use a flat head screw driver to unclip the clips. If you watch my transmission fluid drain and refill on the Prius, I think we showed how to remove the bottom panel... or one of the video on there. Good luck!
     
    #2 NutzAboutBolts, Aug 4, 2017
  3. TryingToLearn

    TryingToLearn Junior Member

    Joined:
    Sep 21, 2014
    5
    0
    0
    Location:
    santa monica, ca
    Vehicle:
    2008 Prius
    Model:
    N/A
    Thanks! I just looked it up, and the bottom panel is the panel on the belly of the prius right? I'm looking more whatever you call the panel directly behind the front bumper that surrounds the wheel well. I tried locating as many screws and pins as I could and taking them out, but still not able to remove the flaps to get behind the bumper.
     
    #3 TryingToLearn, Aug 4, 2017
  4. NutzAboutBolts

    NutzAboutBolts Senior Member

    Joined:
    Mar 5, 2013
    1,476
    1,552
    0
    Location:
    Bay Area
    Vehicle:
    2012 Prius
    Model:
    Four
    I think you'll have to pull the front bumper off of the car to get behind there, or you can try removing the wheel and the fender lining. The bumper is mounted on the bumper support.
     
    #4 NutzAboutBolts, Aug 4, 2017
  5. NavyLCDR

    NavyLCDR Active Member

    Joined:
    Oct 15, 2016
    188
    120
    4
    Location:
    Stanwood, WA
    Vehicle:
    2011 Prius
    Model:
    Three
    The piece you are showing in your photos is called the fender liner. There are a series of clips and screws starting all the way from in front of the front door behind the wheel/tire, and going all the way to the front bumper edge. Look up fender liner replacement.

    It might be easier to just remove the front bumper. I've replaced both fender liners and my 2011 and have also removed and replaced the front bumper. I think the bumper itself is the easier.
     
    #5 NavyLCDR, Aug 5, 2017
  6. Buderim

    Buderim Junior Member

    Joined:
    Jul 22, 2017
    28
    10
    1
    Location:
    Queensland Australia
    Vehicle:
    2010 Prius
    Model:
    i-Tech
    #6 Buderim, Aug 5, 2017
    heiwa and Raytheeagle like this.
(You must log in or sign up to post here.)