1. Attachments are working again! Check out this thread for more details and to report any other bugs.

safe mode after abs acumulator install!!!!!!!!!!!!!!!!!!

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Priusstich, Jun 12, 2018.

  1. Priusstich

    Priusstich Junior Member

    Joined:
    Feb 3, 2018
    16
    0
    0
    Location:
    Wisconsin
    Vehicle:
    2005 Prius
    Model:
    N/A
    Replaced my abs pump. Car ran fine just had no brakes abs brake and vsc light on with the constant buzzer going off. now my car will not power into ready mode. the power button is orange.... cars 12v is 12.59. car always started and ran well. ALWAYS ......

    I have tech stream but its literally smart killing me to try and get it to work........ c1252 c1256 c1259 c1310


    WHY IN THE **** IS THIS POS IN SAFE MODE PLZZZ HELP
     
    #1 Priusstich, Jun 12, 2018
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    You've already done the expensive part, maybe you can allow the dealer or specialist to bleed the brakes for you? You can get the technical info for DIY at techinfo.toyota.com
     
    #2 JC91006, Jun 13, 2018
    PriusDadNoob likes this.
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,323
    15,110
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I take it you are getting these codes some way other than Techstream? (Hey, Swype on my phone knows the word Techstream!) You are listing only codes from the brake/skid ecu, but two of them are repeater codes saying it knows there are some hybrid system codes over in that ecu. You should read those, which will probably reveal the issue.

    Any chance you disturbed anything in the hybrid system while doing the work? Traction battery service plug, perhaps?

    -Chap
     
    #3 ChapmanF, Jun 13, 2018
  4. Priusstich

    Priusstich Junior Member

    Joined:
    Feb 3, 2018
    16
    0
    0
    Location:
    Wisconsin
    Vehicle:
    2005 Prius
    Model:
    N/A
    Thank you for the replies. I did the expensive part yes, and just about ready to tow it in. thing is i know for a fact ill get a call saying... well were in about $500 and we cant figure it out. want to keep going. $$$$$$$$$ thats every call i ever get when i bring something in.

    I followed a guide to do the installation. i was pretty careful with everything. Was not all that hard.

    i started with the 12v and then unplugged the hybrid battery switch plug. and it went all back in easy. double checked all plugs.

    right now im trying to read a users post on how to get tech stream working but its a bunch of crap...... Im pushing this thing outside where it can sit out of the way i guess.


    I dont understand by chnageing the abs pump this prius will not start up green in ready mode. A tech said there is something else going on..... car was fine prior i could drive it with bad brakes. now orange safe mode.....
     
    #4 Priusstich, Jun 13, 2018
  5. Priusstich

    Priusstich Junior Member

    Joined:
    Feb 3, 2018
    16
    0
    0
    Location:
    Wisconsin
    Vehicle:
    2005 Prius
    Model:
    N/A
    Just went to try Toyota tech stream again. After downloading old Java driver's.

    Didn't work again. Slam the computer shut. Pulled mini vci. About to walk away car turns on with no lights drives runs and brakes great with no lights .... Explain that..... Cause my head hurts so bad right. Now...
     
    #5 Priusstich, Jun 13, 2018
  6. hchu1

    hchu1 Active Member

    Joined:
    Sep 28, 2006
    316
    127
    0
    Location:
    Houston, Tx.
    Vehicle:
    2014 Prius v wagon
    Model:
    Two
    You could have a glitchy mini-vci, you pulled it and engine starts up, coincidence?
     
    #6 hchu1, Jun 13, 2018
    SFO likes this.
  7. Priusstich

    Priusstich Junior Member

    Joined:
    Feb 3, 2018
    16
    0
    0
    Location:
    Wisconsin
    Vehicle:
    2005 Prius
    Model:
    N/A
    I cannot believe this prius brakes perfect without bleeding it..... Am i going to wreck anything without getting it bled.
     
    #7 Priusstich, Jun 14, 2018
(You must log in or sign up to post here.)