1. Attachments are working again! Check out this thread for more details and to report any other bugs.

LKAS AND ACC control question

Discussion in 'Prime Accessories and Modifications' started by Mikhail Bond, Dec 23, 2019.

  1. Mikhail Bond

    Mikhail Bond Member

    Joined:
    Nov 12, 2019
    138
    66
    0
    Location:
    Socal
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    anyway to disable this annoying hindrance?

    I think it's absolutely baffling that factory ECU automatically cancels LKAS and ACC control when stopped for longer than 3 seconds.

    I would be perfectly content in traffic if it would stop and go by itself. I sit in LA 405 traffic. sometimes we are stopped for 30 seconds to 3 minutes. Why the hell would I want to continuously re-enable something every 3 seconds?

    anybody see something in techstream for this?
     
    #1 Mikhail Bond, Dec 23, 2019
  2. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    44,809
    16,051
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    ? It doesn’t cancel after 3 seconds (it says “Waiting...”). It cancels after 3 minutes of idle, the drivers door open or you shift to Park.
     
    #2 Tideland Prius, Dec 23, 2019
  3. Mikhail Bond

    Mikhail Bond Member

    Joined:
    Nov 12, 2019
    138
    66
    0
    Location:
    Socal
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    mine says waiting, then one of two things happen.

    1. most likely scenario: it says waiting, then asks me to press the gas to resume(this interrupts my Openpilot system(comma.ai)

    2. abruptly starts beeping, stating system cannot be resumed and I have to reengage.
     
    #3 Mikhail Bond, Dec 23, 2019
  4. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    44,809
    16,051
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    1. Is correct. It does not have an auto resume function. Either press the accelerator or push up on the CC stalk.

    ok you’re talking about comma.ai. You can’t blame an OEM system on the function of an aftermarket system.
     
    #4 Tideland Prius, Dec 23, 2019
    jerrymildred likes this.
  5. Mikhail Bond

    Mikhail Bond Member

    Joined:
    Nov 12, 2019
    138
    66
    0
    Location:
    Socal
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    i just installed the unit today.

    the #2 issue was present even before the aftermarket system.
    it just says system cannot resume press the brake now(i thought this was weird because it sits still anyway)
     
    #5 Mikhail Bond, Dec 24, 2019
  6. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    44,809
    16,051
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    #2 shouldn’t happen unless you triggered one of the scenarios above. Haven’t you tried taking it to the dealer under warranty to get it inspected for codes or adjustment (camera or radar)?
     
    #6 Tideland Prius, Dec 24, 2019
  7. Mikhail Bond

    Mikhail Bond Member

    Joined:
    Nov 12, 2019
    138
    66
    0
    Location:
    Socal
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    unfortunately i've hit 100k and im out of warranty now for anything but the battery
     
    #7 Mikhail Bond, Dec 24, 2019
  8. Tha_Ape

    Tha_Ape Active Member

    Joined:
    Apr 9, 2019
    271
    161
    0
    Location:
    Washington, DC
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    There's a way to enable auto resume in Open Pilot. It's literally commenting out 2 lines of code. (Not sure why it's in there). It tells the car to go into standstill mode

    Learn how to SSH into the device, then edit (I use nano) carcontroller.py and put a "#" in front of lines 178/9 in the attached pic.

    The line numbers can change, you're looking for the lines regarding "standstill".

    Then reboot and voila. The car will auto resume if the car in front of you move . It's the best part of open Pilot if you ask me... stop and go traffic sucks, but this mode makes it a lot more bearable.
     

    Attached Files:

    #8 Tha_Ape, Dec 26, 2019
    mistermojorizin and Mikhail Bond like this.
  9. Mikhail Bond

    Mikhail Bond Member

    Joined:
    Nov 12, 2019
    138
    66
    0
    Location:
    Socal
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    thanks! i setup a linux laptop just to SSH into the device when i received it (bad panda).
    I'll do this after my trip and let you know how it goes.
     
    #9 Mikhail Bond, Dec 26, 2019
  10. vvillovv

    vvillovv Senior Member

    Joined:
    Mar 19, 2013
    3,525
    1,241
    1
    Location:
    NY
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    nice catch @Tha_Ape ! I'll have to take a quick look at it one of these days during an update. Do you know if the release is python 2 or 3?
     
    #10 vvillovv, Dec 27, 2019
  11. illumiN8i

    illumiN8i Active Member

    Joined:
    Jun 2, 2018
    178
    139
    0
    Location:
    Grand Rapids, MI
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Advanced
    Tap resume on the cruise stalk instead of pressing gas pedal to avoid disengaging openpilot. You can hit resume as soon as the car comes to a stop.

    Posted via the PriusChat mobile app.
     
    #11 illumiN8i, Dec 27, 2019
  12. illumiN8i

    illumiN8i Active Member

    Joined:
    Jun 2, 2018
    178
    139
    0
    Location:
    Grand Rapids, MI
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Advanced
    Just be aware that the openpilot auto resume code hack fails if the car is on an incline. It will just sit still and be unable to start moving by itself.

    Posted via the PriusChat mobile app.
     
    #12 illumiN8i, Dec 27, 2019
    Last edited: Dec 27, 2019
  13. vvillovv

    vvillovv Senior Member

    Joined:
    Mar 19, 2013
    3,525
    1,241
    1
    Location:
    NY
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Does AutoPilot gracfully handle all possible resume scenarios from the stick?
    That looks to me like B mode in reverse. I have trouble always remembering to shift out of B mode and back into Drive after slowing or stopping, than continuing. Just imagine using B mode as well as AutoPilot, that is, if I'm understanding the description correctly.
     
    #13 vvillovv, Dec 27, 2019
  14. Tha_Ape

    Tha_Ape Active Member

    Joined:
    Apr 9, 2019
    271
    161
    0
    Location:
    Washington, DC
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    Im not sure. Ive only edited parameters in some files. I highly suggest joining the discord community. Great folks over there with a lot more technical knowledge than me.
     
    #14 Tha_Ape, Dec 27, 2019
    vvillovv likes this.
  15. Tha_Ape

    Tha_Ape Active Member

    Joined:
    Apr 9, 2019
    271
    161
    0
    Location:
    Washington, DC
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    Yes, I've only had that happen once though, at a stop light. It needs to be a pretty substantial hill. You still need to pay attention. But in most situations it's wonderful.
     
    #15 Tha_Ape, Dec 27, 2019
  16. illumiN8i

    illumiN8i Active Member

    Joined:
    Jun 2, 2018
    178
    139
    0
    Location:
    Grand Rapids, MI
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Advanced
    Yes, tapping resume as soon as the vehicle comes to a stop works perfectly fine for me with openpilot.
     
    #16 illumiN8i, Dec 27, 2019
    vvillovv likes this.
(You must log in or sign up to post here.)