1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Oil Catch Can, Eliminate that knock!

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by danlatu, May 22, 2017.

  1. Threej

    Threej Member

    Joined:
    Jan 25, 2018
    97
    99
    0
    Location:
    Portland, OR
    Vehicle:
    2010 Prius
    Model:
    II
    I have to empty my can about every month/ 1000 miles in the winter of its oil/gas/water cappuccino.

    Then I can go the entire summer without emptying it until fall arrives.
     
  2. SuperchargedMR2

    SuperchargedMR2 Diehard Rams Fan

    Joined:
    Feb 13, 2011
    673
    179
    0
    Location:
    Vancouver, WA
    Vehicle:
    2010 Prius
    Model:
    III
    I just got mine installed with a new PCV valve this weekend. Curious to see how this compares to my 2009 Corolla S Turbo OCC. I also cleaned out the intake manifold. I need to still clean the EGR cooler and install new Denso iridium plugs.
     
  3. Rebound

    Rebound Senior Member

    Joined:
    Mar 11, 2010
    3,961
    2,609
    0
    Location:
    Portland, OR
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Maybe we can tackle this together, although I’m overseas for a couple of weeks so it’ll have to wait.
     
    SFO likes this.
  4. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,103
    4,032
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    My occ has a spigot on the bottom that’s made of metal. You twist to loosen and tighten, it has a small leak and contents will drain out into the canned veggie that Raytheeagle gave me to mount the occ inside. The veggie can serves as an overflow if there’s too much in the occ itself. There’s been no CEL for vacuum leak....yet. I can even feed a vacuum nossle hose down to the veggie can and vacuum the overflow out so technically I never have to empty the occ at all.
     
  5. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,105
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    The Moroso can comes with a Fumoto style tap on the bottom, plus a spigot. Very impressive, but takes up a lot of room. With mounting bracket on the lower beam I need to raise the can for the spigot to not be bumping into the undercover. I'm slightly concerned too, that it might snag on something someday, under cover or not.

    It occurs to me that I manage to change the oil on the car by just backing out a drain bolt. Accordingly, after next drain, I might take off all this:

    upload_2020-2-4_13-9-45.png

    And sub this, 3/8" NPT brass plug:

    IMG_1969.JPG
    Maybe a little anti-seize on the threads to help seal.

    All the fittings on the can are 3/8" NPT, a tapered thread that gets progressively tighter as you turn. For the elbows at top I find teflon tape good, both because it seals, and because being somewhat compressible, it allows you to fine tune the elbow position more; the I-can't-tighten-this-any-more point is more of a soft landing with several turns of teflon tape.

    Oh, and that's times two: two cans thus, lol.
     
    #1745 Mendel Leisk, Feb 4, 2020
    Last edited: Feb 4, 2020
  6. scona

    scona Active Member

    Joined:
    Dec 10, 2013
    225
    206
    0
    Location:
    Courtenay, BC, Canada
    Vehicle:
    2013 Prius v wagon
    Model:
    N/A
    Would you consider replacing the drain with a Fumoto Oil drain valve(quick drain), one on each unit? If they functioned properly then perhaps a round cutout in the bottom cover at each valve to make draining a breeze.
     
  7. Rebound

    Rebound Senior Member

    Joined:
    Mar 11, 2010
    3,961
    2,609
    0
    Location:
    Portland, OR
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Why not place it in the bracket so that the bracket holds the top of the catch can, instead of the bottom? Then you can empty it by just unscrewing the base of the can.
     
    Robert Holt likes this.
  8. mjoo

    mjoo Senior Member

    Joined:
    Nov 9, 2016
    1,105
    1,311
    12
    Location:
    Michigan
    Vehicle:
    2010 Prius
    Model:
    III
    Hey fellas, here's an idea for a CC that would be bigger than the Moroso but much cheaper and easily serviceable. Look at the Motorguard M30. It's big enough to put a roll of toiletpaper in as a filter element. My idea would be to remove the filter element, and remove one half of the center tube - they pop out. Turn it upside down so that you can unscrew the base and remove the accumulated fluid.

    This should be enough capacity to last for an oil change.

    [​IMG]

    Edit: I have a spare M30 at home I can take pictures if anyone's interested
     
    Robert Holt, Mendel Leisk and SFO like this.
  9. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,286
    4,225
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Any input on what the max potential CFM coming from the PCV might be?
     
  10. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,105
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Yeah I'm thinking of that too. I only have so much slack in the hoses, for dropping it down. Mostly it's a belts and braces thing, I like to have multiple easements. I do want take it out completely, say every couple of years, clean the wheaties.


    My worst case cc's per mile is through winter, about 100 cc per 4000 kms. It seems to vary with different applications though; some are getting a lot more?
     
  11. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,286
    4,225
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    My bad, meant the total potential volume of gases in cubic feet per minute being passed through the PCV system.

    Of course some engines could be more or less worn than others, but a rough idea will help with sizing separators by flow.
     
  12. tri4all

    tri4all Member

    Joined:
    Oct 20, 2019
    98
    52
    1
    Location:
    Pacific Northwest
    Vehicle:
    2008 Prius
    Model:
    Touring
    so BREATHER or NOT BREATHER for the prius?

    I read through the first few pages and could not find an answer. looking online It seems like one of the drawbacks of the breather is a decrease in pressure, is this really a problem?
     
  13. Nor'easter

    Nor'easter Member

    Joined:
    Nov 16, 2019
    158
    96
    0
    Location:
    New Hampshire
    Vehicle:
    2010 Prius
    Model:
    II
    Non-breather.
     
  14. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,240
    692
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    no breather, you want all the negative pressure to suck the oil fumes out of the crankcase /
     
  15. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,105
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Ditto, non-breather. I think the usual terminology is "vented", for searching.
     
    Cosmo Tigato likes this.
  16. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,103
    4,032
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    It is, youre volunteering for a check engine light and be referenced to vacuum leak.
     
  17. Rebound

    Rebound Senior Member

    Joined:
    Mar 11, 2010
    3,961
    2,609
    0
    Location:
    Portland, OR
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    The whole point of a PCV is to prevent venting of noxious fumes into the air. Clean air is important. We breathe the stuff all day long.
     
  18. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,105
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    When I first installed my Moroso can, I managed to leave it's drain tap open, essentially making it a vented OCC. Drove around the block, thought it sounded kinda weird, the lightbulb went on, I closed the tap (had to take the engine underpanel off once again...), and another drive: back to normal sounds. So a vented can definitely does do something, does a number on it.

    The weird thing was: the drain tap open or closed, there is a nearly air-tight cap over the end of the spigot. Even so it sounded weird. I can imagine without that cap it would have been more noticeable. Basically a vacuum leak?
     
  19. tri4all

    tri4all Member

    Joined:
    Oct 20, 2019
    98
    52
    1
    Location:
    Pacific Northwest
    Vehicle:
    2008 Prius
    Model:
    Touring
    I feel the oil can should be placed at the same height or lower than the PCV valve. instead of the proposed location by many in this forum.

    The reason being is perhaps premature failure of PCV valve by either the long travel of oil against gravity. The hose is long enough already (about 30 times more than the original) and the oil has to travel along the path against gravity.

    Now, my understanding is that there might be enough vacuum to suck up all the oil but what happens when the car stops and you have 3 feet of hose with oil pressing against the PCV valve.

    please correct me if I am wrong with my train of thought on this issue.
     
    Paul E. Highway and Raytheeagle like this.
  20. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,251
    15,474
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    Nope, I placed it low on our 2010:).

    Why risk additional back pressure against the check calve if you don't need to;).

    The I beam placement works well as a knock out pot, which is what I wanted(y).