1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Clean windscreen in front of camera

Discussion in 'Gen 4 Prius Technical Discussion' started by Wando, Feb 6, 2021.

  1. Wando

    Wando Junior Member

    Joined:
    Mar 8, 2007
    19
    3
    0
    Location:
    United Kingdom
    Vehicle:
    2017 Prius
    Model:
    Business Ed. Plus
    I have noticed that sometimes the windscreen in front of the “front camera” (i.e. the one used for lowering beams, etc...) gets fogged up and this affects the functionality of the camera for all of the functions that it is used for.
    Air conditioning and the windscreen defroster eventually take care of removing the fogging, however this made me think that, as that area is not sealed it will eventually require cleaning (on the inside).
    Is it possible to temporarily remove the camera plastic casing so that one could clean the inside of the windscreen with a cloth?
     
  2. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,491
    14,099
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    alanclarkeau and Wando like this.
  3. Wando

    Wando Junior Member

    Joined:
    Mar 8, 2007
    19
    3
    0
    Location:
    United Kingdom
    Vehicle:
    2017 Prius
    Model:
    Business Ed. Plus
    Thank you. Unfortunately the “instructions” are not very clear.
    I have asked for further information and hopefully the person that did it is still on the forum.

    Cheers
     
  4. AzWxGuy

    AzWxGuy Weather Guy

    Joined:
    May 22, 2011
    967
    489
    0
    Location:
    Tucson, AZ
    Vehicle:
    2021 Prius
    Model:
    Limited
    I have wondered about that too. The pages and pages of instructions and warnings in the owner's manual attest to the fact that this would probably not be a DIY process. Cleaning of the interior glass inside the camera housing would require removal and subsequent recalibration of the camera. I'm just now coming up on 5000 miles and managed the other day to acquire a windshield star near the lower right corner. Darn Arizona roads. The brochure from the Safelite AutoGlass company that repaired my windshield indicates that subsequent to windshield replacement on a vehicle that has one of these Advanced Driver Assistance Systems they will perform a recalibration and warranty it for 12 months. Nothing specific to that system mentioned in the Toyota Maintenance Log.
     
  5. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,491
    14,099
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    I'm working on a video or at least pictures right now. It's easy to do, but it's hard to get a camera on it while doing it and my hands are starting to shake. Break time!
     
    Wando likes this.
  6. Wando

    Wando Junior Member

    Joined:
    Mar 8, 2007
    19
    3
    0
    Location:
    United Kingdom
    Vehicle:
    2017 Prius
    Model:
    Business Ed. Plus
    I could be wrong, but it seems to me that one could remove the casing without disturbing the camera itself which seems contained within such casing, but independent from it.
    Once the casing is off, there should be enough space to clean the windscreen with a cloth.
     
  7. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,491
    14,099
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    No, the camera has to come out. My wife is doing her PT for her knee replacement now. She said she would hold the camera for me when she's done. There are too many things that take two hands and there's no place to position the camera on a tripod to do it solo. I'll try to be done here in a couple hours.
     
  8. ihatenoise

    ihatenoise Junior Member

    Joined:
    Dec 1, 2020
    7
    3
    0
    Location:
    Toronto
    Vehicle:
    2016 Prius
    Model:
    Base
    From the maintenance manual "If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning." so it looks like it's okay to remove the camera without calibrating? I haven't tried it though.

    upload_2021-2-7_12-16-5.png
    upload_2021-2-7_12-16-33.png
     
  9. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,491
    14,099
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    All done. I couldn't find a video online, so I made one. Many thanks to my patient wife who did the camera work where I didn't have enough hands.
     
  10. Wando

    Wando Junior Member

    Joined:
    Mar 8, 2007
    19
    3
    0
    Location:
    United Kingdom
    Vehicle:
    2017 Prius
    Model:
    Business Ed. Plus
    Wow, thank you very much, this is great.
    I must say that it looks a bit unnerving as my previous experience with plastic is that sometimes it just snaps...
    However, you have proved my suspicion that that part of the windscreen WILL need to be cleaned from time to time.
    Thanks again. At some point I will have a go in my car.
     
    jerrymildred likes this.
  11. Wando

    Wando Junior Member

    Joined:
    Mar 8, 2007
    19
    3
    0
    Location:
    United Kingdom
    Vehicle:
    2017 Prius
    Model:
    Business Ed. Plus
    @jerrymildred I assume that’s this operation will not affect the camera calibration?
     
  12. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,253
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    In the Repair Manual (more info), Toyota writes, “If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.”

    I assume the inverse is true, too: if neither the camera nor the glass is new, then learning (adjustment) isn’t needed.
     
    jerrymildred likes this.
  13. Wando

    Wando Junior Member

    Joined:
    Mar 8, 2007
    19
    3
    0
    Location:
    United Kingdom
    Vehicle:
    2017 Prius
    Model:
    Business Ed. Plus
    I am not fully convinced.
    The operation for changing the glass involves dismounting the camera and putting it back in place, which is exactly what we are doing here.
    Unless their concerns are about using non proprietary glass with different optical characteristics? But this would seem odd.

    Then again, a camera is a camera is a camera. If it was calibrated before I started the operation, then it should still be when I put it back together.
    Micro movements are irrelevant in any camera operation, unless it is mounted over a microscope.
     
  14. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,491
    14,099
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    Given that your info doesn't give a location, that's possible. I have no idea how cold it is where you are.

    Not in the least. It works just like before since it went right back in the same place. What surprised me was how loosely it fits in its bracket and how loose the bracket is in its mount.
     
    alanclarkeau and Wando like this.
  15. Wando

    Wando Junior Member

    Joined:
    Mar 8, 2007
    19
    3
    0
    Location:
    United Kingdom
    Vehicle:
    2017 Prius
    Model:
    Business Ed. Plus
    Once again, thank you.
    I live in the UK by the way, but I can wait until summer if that helps.
     
    jerrymildred likes this.
  16. Mambo Dave

    Mambo Dave Active Member

    Joined:
    Jul 5, 2019
    640
    305
    0
    Location:
    33312
    Vehicle:
    2019 Prius
    Model:
    L Eco
    Awesome! Thank you for creating the video, Jerry.
     
    jerrymildred likes this.