1. Attachments are working again! Check out this thread for more details and to report any other bugs.

HV Nut Removal when STUCK

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Hitech51, Mar 26, 2021.

Tags:
  1. Hitech51

    Hitech51 Junior Member

    Joined:
    Jan 15, 2011
    12
    2
    3
    Location:
    Houston, Tx
    Vehicle:
    2013 Prius v wagon
    Model:
    Three
    Got the HV battery out to recondition it ...but... 14 Nuts will not come loose from the battery modules....
    Tried 3 sockets and even ground down one to make it fit better but no go...
    Tried vise grips, and unfreezing liquid spray, etc....
    Any suggestions ???
     
    #1 Hitech51, Mar 26, 2021
    Last edited: Mar 26, 2021
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    659
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
  3. Hitech51

    Hitech51 Junior Member

    Joined:
    Jan 15, 2011
    12
    2
    3
    Location:
    Houston, Tx
    Vehicle:
    2013 Prius v wagon
    Model:
    Three
    Drill out a nut that is connected to the bolt going into the plastic battery module ??? Explain ?
     
    Mendel Leisk likes this.
  4. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,516
    1,789
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    See if this helps:
     
  5. fotomoto

    fotomoto Senior Member

    Joined:
    Apr 22, 2009
    5,596
    3,770
    0
    Location:
    So. Texas
    Vehicle:
    Other Hybrid
    Yes, I would take that as yet another (14) sign(s) it's time for a new battery.
     
  6. sam spade 2

    sam spade 2 Senior Member

    Joined:
    Mar 31, 2018
    7,035
    2,780
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    A "light duty" impact tool might help a lot.
    Giving it a few shots in BOTH directions will often break them loose.

    There is a "nut breaker" device that can be quite useful but not in a tight space like the picture shows.
     
    Mendel Leisk likes this.
  7. mr_guy_mann

    mr_guy_mann Senior Member

    Joined:
    Sep 3, 2020
    3,204
    1,337
    0
    Location:
    NJ-USA
    Vehicle:
    2006 Prius
    Model:
    Four
    Option 1: use a small cut off wheel on a dremel tool to slice away part of the nut then use vice grips to break what's left.
    Option 2: replace the battery- get a used pack and recondition that

    Posted via the PriusChat mobile app.
     
  8. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,058
    5,783
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    14 nuts on a 2013 HV battery will not come loose? Is this a previously repaired/worked on battery?
     
  9. Hitech51

    Hitech51 Junior Member

    Joined:
    Jan 15, 2011
    12
    2
    3
    Location:
    Houston, Tx
    Vehicle:
    2013 Prius v wagon
    Model:
    Three
    Yes, it was taken apart as to nuts and the bars, cleaned and greased. Dr prius suggested replacement of a few modules but we want to cycle them first to see the real capacity of each. the voltage is btw 7.8 and 7.85 for each at this time....
    Broke one socket tool set from HomeDepot and now ready to try the one from AutoZone.... Lastly will cut a crease in the nut....