Please help

My grandparents have a 2008. Long story short grandma “hit a bush” and wrecked the passenger side doors. I went to the junk yard got 2 new doors. I stripped them down and got them painted. I reassembled the front passenger door with the original doors parts including the window motor and all the wiring. I rolled the window down before I pulled the door now all of a sudden in the new door it isn’t working. Door locks work. Out side button works and speakers work. I tried a different motor and same issue. Also swapped the harness and still had the issue. The window is stuck down all the way. Is there a reset procedure to make it work? I have yet to find an interior fuse panel. Any help will be greatly appreciated.

 

Thank you for the reply I tried the rear switch that is known to be good still nothing. The window worked 2 hours earlier when I rolled it down to unbolt the track to swap it over. I tried a second motor assembly holding it outside the door and still got nothing.