1. Attachments are working again! Check out this thread for more details and to report any other bugs.

[video] repairing shock absorber on a Prius (worth it?)

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by abubin, Jan 17, 2022.

  1. abubin

    abubin Member

    Joined:
    Dec 7, 2019
    179
    89
    0
    Location:
    Malaysia
    Vehicle:
    2012 Prius
    Model:
    N/A
    My shocks are already not working in good condition. I figured, why not get it checked by specialists to see if it can be repaired. I know generally it is better to have them replaced with new but this TRD shocks that I am using is not cheap. Repairing it only cost me 10% of buying new.

    So why not? Let me test it out to see if this is a viable solution.

     
    #1 abubin, Jan 17, 2022
  2. Kenny94945

    Kenny94945 Active Member

    Joined:
    Mar 24, 2016
    769
    394
    0
    Location:
    Sausalito
    Vehicle:
    2016 Prius v wagon
    Model:
    Four
    Interesting.
    Sure a TRD shock would be worth a rebuild.
    In the video, to me, it did not show the show the repair, seems to be only removal, test, and reinstall.

    For DIY, an oil change and gas recharge are standard, at least with racing vehicles.
    I'd question the gas recharge, maybe utilize a sharder value.

    The oil weight, volume and gas pressure plus all the seals would be needed info and parts.
    Again, Interesting.

    Yes a specialist for TRD maybe a good idea and cost effective.
     
    #2 Kenny94945, Jan 17, 2022
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,302
    15,094
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The part of that I really want to watch is welding the hole shut with pressurized oil and gas inside.

    The rest of the steps sound pretty easy.
     
    #3 ChapmanF, Jan 17, 2022
  4. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    8,083
    1,396
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Some type of one-way valve fitted to the case used for filling and removal afterward or from then on I didn't realize stress are so expensive at the present time usually we've just replaced
     
    #4 Tombukt2, Jan 17, 2022
  5. abubin

    abubin Member

    Joined:
    Dec 7, 2019
    179
    89
    0
    Location:
    Malaysia
    Vehicle:
    2012 Prius
    Model:
    N/A
    Unfortunately, the owner did not allow me to video him with the shock repair. Apparently it is secret that he does not even allow his staff to see. He went into a covered room and did his thing.
     
    #5 abubin, Jan 18, 2022
(You must log in or sign up to post here.)