1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Engine scraping sound

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by David Scott Dallas, May 27, 2022.

  1. David Scott Dallas

    David Scott Dallas Junior Member

    Joined:
    Oct 15, 2017
    33
    12
    0
    Location:
    Dallas
    Vehicle:
    2015 Prius
    Model:
    One
    I have a strange engine sound. 2011 Prius with 114k. Unknown maintenance history. Being sold by Carmax. When the engine kicks on there is a scraping sound like something is dragging even when the car is not moving. Happens when I drive slowly up to about 40 or 50 then don’t hear it anymore. If I accelerate under electric power only there is no sound. As soon as the engine kicks on there it is. The sound doesn’t change with speed. Sounds the same sitting still as it does going 50. Any ideas?
     
    #1 David Scott Dallas, May 27, 2022
  2. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    7,559
    4,431
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Do a good video of the engine that captures the sound. Usually noises "go away" after 50 mph because of road noise masking them out.
     
    #2 rjparker, May 27, 2022
    David Scott Dallas likes this.
  3. David Scott Dallas

    David Scott Dallas Junior Member

    Joined:
    Oct 15, 2017
    33
    12
    0
    Location:
    Dallas
    Vehicle:
    2015 Prius
    Model:
    One
    It doesn’t seem like road noise is masking it. It’s very clear at 40to 45. Gone at 50.
     
    #3 David Scott Dallas, May 27, 2022
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,256
    15,060
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Does it change with engine speed?

    You are able to "race" the engine a little while sitting in Park. It is computer controlled (throttle by wire), so there's no direct connection, but the computer is programmed to say "hmm, driver is pushing the go pedal while we're parked, ok, I'll play along and increase the RPMs a little". :))

    If the sound doesn't have some quality that's proportional to the engine speed, then it may well be a loose buzzy heat shield. Those can sound a little like scraping.
     
    #4 ChapmanF, May 27, 2022
    David Scott Dallas likes this.
  5. David Scott Dallas

    David Scott Dallas Junior Member

    Joined:
    Oct 15, 2017
    33
    12
    0
    Location:
    Dallas
    Vehicle:
    2015 Prius
    Model:
    One
    Lol. Never mind. It was the heat shield loose around the cat converter
     
    #5 David Scott Dallas, May 27, 2022
  6. David Scott Dallas

    David Scott Dallas Junior Member

    Joined:
    Oct 15, 2017
    33
    12
    0
    Location:
    Dallas
    Vehicle:
    2015 Prius
    Model:
    One
    Yeah you nailed it!
     
    #6 David Scott Dallas, May 27, 2022
  7. David Scott Dallas

    David Scott Dallas Junior Member

    Joined:
    Oct 15, 2017
    33
    12
    0
    Location:
    Dallas
    Vehicle:
    2015 Prius
    Model:
    One
    By the way should I take that off of the car? Do I really need it?
     
    #7 David Scott Dallas, May 27, 2022
  8. CR94

    CR94 Senior Member

    Joined:
    Dec 2, 2014
    2,642
    1,134
    0
    Location:
    Northwestern S.C.
    Vehicle:
    2011 Prius
    Model:
    Two
    Toyota spent the money to put it there for a reason. Can you devise a way to secure it so it doesn't rattle?
     
    #8 CR94, May 28, 2022
    Mendel Leisk likes this.
  9. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    7,559
    4,431
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Usually a cat heat shield is designed to protect other parts of the vehicle from excessive catalytic converter heat. The problems prevented could be melted wires, extremely hot floorboards, overheated electronics or outright fires.
     
    #9 rjparker, May 28, 2022
  10. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,647
    38,201
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Yeah "should I rip this part off?" is usually not a good idea. Well maybe except for those plastic wheel covers...
     
    #10 Mendel Leisk, May 28, 2022
    Half Vast and CR94 like this.
(You must log in or sign up to post here.)