1. Attachments are working again! Check out this thread for more details and to report any other bugs.

-10 ignition timing Shakey engine

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by sergbot, Oct 26, 2022.

  1. sergbot

    sergbot Junior Member

    Joined:
    Jan 19, 2021
    19
    2
    0
    Location:
    Hawaii
    Vehicle:
    2009 Prius
    Model:
    N/A
    Have this weird problem I haven't been able to figure out, the ignition timing goes to -10, have anyone had a Prius that does this? And while this is happening, the engine is misfiring And rattling, and there's a strong gasoline smell coming from the exhaust and the exhaust whooshes. I've changed fuel injectors, o2 sensors, spark plugs, maf. But I think this -10 timing has something to do with it.
     
    #1 sergbot, Oct 26, 2022
  2. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,297
    4,237
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Do you have any warning lights being displayed on the dash?

    Which OBD2 scanner are you using, as many here like to use Techstream with a Mini-vci cable on a winblows device (or emulated).

    Please tell us more about these replacement parts. Which plugs, injectors, sensors did you purchase (make/model or part #), and were they purchased OEM from a toyota dealer/local parts shop, or from which online retailers ? (knockoff parts are quite common).
     
    #2 SFO, Oct 26, 2022
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    9,137
    1,586
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    I don't even know what the specs are for the ignition timing when the cars running you know 2000 RPMs or any of that but certainly 10° sounds a little off. And I'm sure it's all handled by the ECU one of them so it's either seeing something very strange or some kind of sensor is wacko
     
    #3 Tombukt2, Oct 26, 2022
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,912
    49,492
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    how many miles on her?
     
    #4 bisco, Oct 26, 2022
  5. sergbot

    sergbot Junior Member

    Joined:
    Jan 19, 2021
    19
    2
    0
    Location:
    Hawaii
    Vehicle:
    2009 Prius
    Model:
    N/A
    It's not 10, it's negative 10, which I think is kinda unheard of right?
     
    #5 sergbot, Oct 26, 2022
  6. sergbot

    sergbot Junior Member

    Joined:
    Jan 19, 2021
    19
    2
    0
    Location:
    Hawaii
    Vehicle:
    2009 Prius
    Model:
    N/A
    212k but I've been having this issue since 180,000
     
    #6 sergbot, Oct 26, 2022
  7. sergbot

    sergbot Junior Member

    Joined:
    Jan 19, 2021
    19
    2
    0
    Location:
    Hawaii
    Vehicle:
    2009 Prius
    Model:
    N/A
    Can't get tech stream to work, the manufacturer who sold the minivci cable only included driver that aren't compatible with modern win 8 and win 10 oses. I used different scanners. Torque pro, car doctor, auctel maxi 2000.
    Denso o2 sensors
    I think the plugs are denso iridium, generic fuel injectors and other components, I don't know if it matters because the ignition timing has been fucked before the part replacements and it still is. I just threw a parts cannon on it.

    But I can't really fix it without understanding why the computer would command -10 ignition timing. Does anyone know how this could happen
     
    #7 sergbot, Oct 26, 2022
  8. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    9,137
    1,586
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    On my Corolla w distributor set is 8 degrees BTDC then they're were retard and advance diaphragms on that distributor too.I don't remember what total advance or retard was
     
    #8 Tombukt2, Oct 27, 2022
  9. mr_guy_mann

    mr_guy_mann Senior Member

    Joined:
    Sep 3, 2020
    3,470
    1,514
    0
    Location:
    NJ-USA
    Vehicle:
    2006 Prius
    Model:
    Four
    You have a problem- engine misfire with resulting rattle (from the transmission damper) and exhaust smell.

    You also have an observation- ignition timing being commanded at (-) 10°. I am not sure that those two things are directly related.

    I do know that when you ready up a Gen2 Prius after a cold soak, the ICE will run for a time (20-30+ seconds?) even if you don't immediately drive anywhere. During that "cold run" the ECM commands ignition to fire at (-)10° , that is 10° AFTER top dead center. It does this to cause the fuel air mixture to keep burning into the exhaust stroke so that the extra heat will help the catalytic converter to "light off" quickly.

    So under some conditions the "late" ignition timing is normal.

    Any misfire is not normal. Does the car miss all the time? More at idle, or under load? Cold or hot? Any check engine light and codes? Gotta go over basics - do the coils actually produce adequate spark? Do the injectors spray fuel? What are fuel trims when the engine is warm (at idle and at cruise)? Engine compression in spec?

    Posted via the PriusChat mobile app.
     
    #9 mr_guy_mann, Oct 27, 2022
  10. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,297
    4,237
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    So you have no warning lights, and no DTC codes?
    Have you tried this preinstalled version : https://blog.obdii365.com/2019/11/04/download-techstream-v12-vmware-for-vxdiag-toyota/
    Might try switching back to the old injectors, and see how much the fuel trims change. "New" chinese knockoffs have known issues.

    Would also be suspect of knockoff plugs and coils, unless purchased from known retailers. When did you last inspect the plugs or cops?
     
    #10 SFO, Nov 3, 2022
(You must log in or sign up to post here.)