1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Can’t reset maintenance required - my dash is different

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by Firerescue325, Oct 1, 2023.

  1. Firerescue325

    Firerescue325 New Member

    Joined:
    Oct 1, 2023
    1
    0
    0
    Location:
    Los Angeles ca
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    My mph/km/h rocker switch inst on my dash. It’s on the side under the gas filler panel release

    The button everyone is pushing to reset the maintenance required message is my charging time button

    I know we have reset it at least 4 times before now so I know it can be done. It’s on trip a - we shut the car off. Have tried the mph button on dash. Have tried the button shown In videos - have even tried both buttons together then pressing start twice - nothing is resetting it
     

    Attached Files:

  2. nicoj36

    nicoj36 Active Member

    Joined:
    Oct 15, 2013
    495
    158
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Hold the kmh/mph button and the power button
     
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,705
    49,399
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    it's all laid out in the owners manual. the poorly written japanenglish can be frustrating sometimes, but it can be reset eventually
     
  4. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    55,443
    38,657
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    What’s the downside if you don’t reset, say parts of the dash display are obscured, there’s a beeping, or?

    Canadian spec Prius thankfully don’t have this.
     
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    108,705
    49,399
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    you get the maintenance required message every time you start out, and you have to toggle pat it. just a minor pain, but unnecessary.
    it's on the power bar screen iirc.
     
    Mendel Leisk likes this.