1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replacing Volume Control Knob on 2008

Discussion in 'Knowledge Base Articles Discussion' started by Fredii, Aug 24, 2023.

  1. Fredii

    Fredii Junior Member

    Joined:
    Jan 10, 2022
    12
    2
    0
    Location:
    24153
    Vehicle:
    2009 Prius
    Model:
    II
    My new to me 2008 Prius has a missing volume control knob. You can stick your finger in it and turn to adjust the volume.

    But I also have a 2009 Prius that I am selling that does have the volume knob.

    Can I just pull out the knob on the 2009 and stick it on the 2008?
     
  2. sam spade 2

    sam spade 2 Senior Member

    Joined:
    Mar 31, 2018
    7,035
    2,788
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    Is the '09 being sold for junk ?
    If not, that would be a REALLY dirty trick.
    BEYOND rude.

    Much better to visit a salvage yard.
    They should be able to get you a knob that will fit for about a buck.

    Or one from a dealer can't be THAT much.
     
  3. Fredii

    Fredii Junior Member

    Joined:
    Jan 10, 2022
    12
    2
    0
    Location:
    24153
    Vehicle:
    2009 Prius
    Model:
    II
    My salvage yard will only sell me the who radio, which they dont have.
     
  4. sam spade 2

    sam spade 2 Senior Member

    Joined:
    Mar 31, 2018
    7,035
    2,788
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    OK so is there only ONE yard nearby to you ??

    So try some custom car audio shops.

    And have you actually asked a dealer if they can order one ?????
    If not, why not ??
     
  5. MasonJensen

    MasonJensen New Member

    Joined:
    Oct 7, 2023
    5
    0
    0
    Location:
    United States
    Vehicle:
    2022 Prius Prime
    Model:
    III
    Considering swapping the volume control knob from my 2009 Prius to my newly acquired 2008 Prius, which is missing its knob. Has anyone attempted a similar swap, and does it seem feasible?
     
  6. Fredii

    Fredii Junior Member

    Joined:
    Jan 10, 2022
    12
    2
    0
    Location:
    24153
    Vehicle:
    2009 Prius
    Model:
    II
    The knob seems just to pull straight off, at least, that is how I put a new, 3d printed knob on it. However, the 3d printed knob seems a little weak.