1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Cleaning filter in hybrid battery backseat vents

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by h1ph0panonymous, Oct 19, 2023.

  1. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four
    How does one remove the vent cover to easily vacuum the filter?

    no I’m not taking apart the trunk access to it, that’s for cleaning the fan.
     
    #1 h1ph0panonymous, Oct 19, 2023
  2. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,164
    3,309
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    It depends on if you have one INSIDE behind the cover, you have a cover over the vent.
    You can do a search and find video's on youtube on how to remove the cover.

     
    #2 ASRDogman, Oct 19, 2023
    h1ph0panonymous likes this.
  3. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,164
    3,309
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    It depends on if you have one INSIDE behind the cover, you have a cover over the vent.
    You can do a search and find video's on youtube on how to remove the cover.

     
    #3 ASRDogman, Oct 19, 2023
    h1ph0panonymous likes this.
  4. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four
    I just watched someone do it on a prime, different design but same lay out the filter was right behind the grill of the vent and they used a flat head screwdriver to pry one corner out then carefully the rest by pulling it apart slowly.
     
    #4 h1ph0panonymous, Oct 19, 2023
  5. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,164
    3,309
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    I only know of the one on a Gen 3. It's on the right side trim piece on the rear seat.
    There wasn't an inner filter on mine. I bought the one that clips on and I also bought
    some mesh a/c filter and cut it to fit behind it.
    It catches all the fur and dirt. All I have to do is pop it out, rinse it out, and reinstall.

     
    #5 ASRDogman, Oct 19, 2023
    h1ph0panonymous likes this.
  6. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four
    Deleted
     
    #6 h1ph0panonymous, Oct 19, 2023
  7. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four
    Deleted keeps double posting...
     
    #6 h1ph0panonymous, Oct 19, 2023
  8. mikey_t

    mikey_t Active Member

    Joined:
    Feb 5, 2019
    370
    391
    0
    Location:
    Los Angeles
    Vehicle:
    2010 Prius
    Model:
    Two
    It isn't difficult: there's a bolt (12mm socket size, I believe) that holds the base of the plastic part with the vent cover. You can remove it by pushing aside the seat cushion, reach in with a ratchet and extension. Once that bolt is out you pop the the vent cover out.
     
    #7 mikey_t, Oct 19, 2023
    Mendel Leisk and h1ph0panonymous like this.
  9. bdc101

    bdc101 Member

    Joined:
    Sep 23, 2023
    250
    88
    0
    Location:
    usa
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    Yeah, I think it's just the one bolt at the bottom of the panel with the filter in it.

    Does anyone know what years/models came with filters? I got conflicting information whether I could retrofit the later unit with a filter to my 2010.
     
    #8 bdc101, Oct 20, 2023
    h1ph0panonymous likes this.
  10. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,164
    3,309
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    This....
     

    Attached Files:

    #9 ASRDogman, Oct 20, 2023
  11. bdc101

    bdc101 Member

    Joined:
    Sep 23, 2023
    250
    88
    0
    Location:
    usa
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    Yes, I've seen that information in other posts, but does it fit right onto the earlier models that didn't come with it? I haven't been able to find a straight answer in my searches yet.
     
    #10 bdc101, Oct 20, 2023
  12. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,164
    3,309
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    It was designed for the 3rd Generation. I have a 2010. It fits mine.
    You can try it while you're at the dealership and if it doesn't fit, return it.

     
    #11 ASRDogman, Oct 20, 2023
  13. bdc101

    bdc101 Member

    Joined:
    Sep 23, 2023
    250
    88
    0
    Location:
    usa
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    Cool, thank you for clarifying!
     
    #12 bdc101, Oct 21, 2023
    ASRDogman likes this.
  14. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four
    Thank you, I did that yesterday and was only able to have enough room to fit the vacuum extension into to vacuum it, the filter would not come out, so what I did was dissect one of my new micro filter vacuum bags and use the least air restricting layer to lay on top the metal filter the Prius comes with, not a perfect cut or fit but it stayed in place after I put it in there, some metal mesh is exposed but it’s got low miles on it so far plus I have dog so not too worried about the fan getting dirty or needing to be cleaned.

    I have a 2014
     
    #13 h1ph0panonymous, Oct 21, 2023
  15. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four
    my filter is shaped nothing like this and it’s a 2014, so weird how Toyota did things.
     
    #14 h1ph0panonymous, Oct 21, 2023
  16. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,164
    3,309
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Which Prius do you have?
    You must have a different model. There is no metal in the filters for the Hybrid system.
     
    #15 ASRDogman, Oct 21, 2023
  17. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four
    The 4 model, so what the hell did I just clean then lol I followed everyone’s recommendation to unbolt the 12mm bolt and got access to it, is that not that hybrid system battery filter? Maybe it’s plastic mesh and not metal but it’s definitely a mesh style filter.
     
    #16 h1ph0panonymous, Oct 21, 2023
  18. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four
    are you able to take a picture of your vent location?
     
    #17 h1ph0panonymous, Oct 21, 2023
  19. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,164
    3,309
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    It's on the piller on the right side of the back seat...
    Watch this video:
     
    #18 ASRDogman, Oct 21, 2023
    Last edited: Oct 21, 2023
    h1ph0panonymous likes this.
  20. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four

    Awww it’s a modified OEM replacement of the weirdly shaped pre-existing filter and such I see now, thanks.
     
    #19 h1ph0panonymous, Oct 21, 2023
  21. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four

    Awww it’s a modified OEM replacement of the weirdly shaped pre-existing filter and such I see now, thanks.
     
    #19 h1ph0panonymous, Oct 21, 2023
  22. h1ph0panonymous

    h1ph0panonymous Junior Member

    Joined:
    Oct 9, 2023
    71
    15
    0
    Location:
    Minnesota
    Vehicle:
    2014 Prius
    Model:
    Four

    Awww it’s a modified OEM replacement of the weirdly shaped pre-existing filter and such I see now, thanks.
     
    #20 h1ph0panonymous, Oct 21, 2023
    mikey_t likes this.
(You must log in or sign up to post here.)