1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Check hybrid system

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by nicoj36, Feb 12, 2024.

  1. nicoj36

    nicoj36 Active Member

    Joined:
    Oct 15, 2013
    495
    158
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Sup prius fam,

    Did egr cleaning on my other prius today and forgot to attach one of the hoses for throttle-body. Check hybrid system came up after starting. I connected the hose and it started but the check hybrid system is still there. Would it clear itself eventually once it realizes everything is good, or should it clear it with obd? Also what are other ways to clear check hybrid? 12v disconnect?

    thanks prius fam
     
  2. Mr. F

    Mr. F Active Member

    Joined:
    Sep 21, 2020
    360
    210
    0
    Location:
    Washington
    Vehicle:
    2010 Prius
    Model:
    IV
    Hard to tell without knowing the specific code that was triggered.
     
    Brian1954 likes this.
  3. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    55,407
    38,644
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    A coolant hose?
     
  4. nicoj36

    nicoj36 Active Member

    Joined:
    Oct 15, 2013
    495
    158
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Not sure exactly but it's the one facing towards the front of the car, right in front of the throttle body
     
    Mendel Leisk likes this.
  5. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    55,407
    38,644
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    That might be fuel vapour return, going into intake manifold, just below throttle body. Leaving that off would make a significant vacuum loss.
     
    nicoj36 likes this.