1. Attachments are working again! Check out this thread for more details and to report any other bugs.

abs, brake, traction light on.

Discussion in 'Gen 3 Prius Main Forum' started by Mopar, Jun 30, 2024 at 11:35 AM.

  1. Mopar

    Mopar Junior Member

    Joined:
    Nov 8, 2011
    18
    2
    0
    Location:
    Fort Worth Texas
    Vehicle:
    2011 Prius
    Model:
    III
    Troubleshot this and found the rear lh speed sensor wire harness had been broken. I replaced the wire harness and drove the car for a couple days to see if the error light would clear. It did not clear and so I tried disconnecting the battery for about and hour and reconnected. It still did not clear. Is there some way to clear the error lights without the use of a scanner or techstream?

    Thanks,
    Roger
     
    #1 Mopar, Jun 30, 2024 at 11:35 AM
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,763
    15,405
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    First you need to find out why those lights are on. Could be the thing you fixed, could be something else.

    If you don't have a scan tool that can show you what the trouble codes are, you can find out this way:

    Blink (a/k/a Flash) Codes – How to. | PriusChat
     
    #2 ChapmanF, Jun 30, 2024 at 12:14 PM
  3. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,044
    3,245
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Are you sure it's fixed? Maybe another sensor is bad? Or has wiring issues.
    You should get a scanner that will read the ABS system and find out what the issue is.

     
    #3 ASRDogman, Jun 30, 2024 at 12:23 PM
(You must log in or sign up to post here.)