1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Head gasket worry

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by C-in-DC, Jul 3, 2024 at 6:13 AM.

  1. C-in-DC

    C-in-DC Member

    Joined:
    Jan 14, 2023
    467
    64
    0
    Location:
    Washington D.C.
    Vehicle:
    2010 Prius
    Model:
    Limited
    Been having a rough ride lately. Got a Code P0303. Few hours later I got a p0818. Data stream showed the coolant temp at -40 celcius. After purchasing a new engine coolant temp sensor I drove home (about 60 miles) with the check engine light on. When I changed the sensor I realised the connector had a broken wire. I got a new connector pigtail and soldered it onto the harness again. The above codes cleared however the rough engine is still occurring. I’m also smelling a burnt wire smell(maybe just the wires I soldered?)

    When I read my data-stream with a scan tool I’m seeing cylinder misfires but no code is thrown. I’m also seeing the misfires clear in the data stream. Is this possible? Most of the misfires are in cylinder 3 and four. Worried I blew a head gasket because I drove on p0818.
     
    #1 C-in-DC, Jul 3, 2024 at 6:13 AM
    Last edited: Jul 3, 2024 at 6:20 AM
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    8,916
    1,553
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    This is all real common for this engine so there's always that. It's inspection camera time basically That's the easiest way to rule out all the nonsense or else you go through all the silliness of these tests and what have you and still don't know what you're really looking at. When you look in the cylinder bores. You pretty much get the end all be all definitive answer.
     
    #2 Tombukt2, Jul 3, 2024 at 7:55 AM
  3. Brian1954

    Brian1954 Active Member

    Joined:
    Jan 31, 2021
    790
    299
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    Did you type the P0818 trouble code wrong? Did you mean P0118 instead?

    Driving around with a P0118 code will probably not cause the engine to overheat. It would not affect the head gasket.

    I do not think the P0118 and the C0303 engine misfires are related. They are two separate issues.
     
    #3 Brian1954, Jul 3, 2024 at 9:02 AM
    Last edited: Jul 3, 2024 at 9:09 AM
  4. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    55,412
    38,644
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    What’s the miles?
     
    #4 Mendel Leisk, Jul 3, 2024 at 9:18 AM
  5. Eddie25

    Eddie25 Active Member

    Joined:
    Dec 31, 2018
    354
    129
    0
    Location:
    IL
    Vehicle:
    2011 Prius
    Model:
    III
    The vast majority of head gasket issues seem to be on cylinder 1 and possibly 2, so at least there's that. If you can watch the misfires on the scan tool I would just start with typical misfire troubleshooting like first swapping coils around, then spark plugs and see if the misfire stays or moves.
     
    #5 Eddie25, Jul 3, 2024 at 10:46 AM
(You must log in or sign up to post here.)