1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Found some compatible connectors for making extensions for dash buttons

Discussion in 'Gen 5 Prius Accessories and Modifications' started by soft_r, Jul 3, 2024.

  1. soft_r

    soft_r Junior Member

    Joined:
    Feb 25, 2024
    66
    34
    2
    Location:
    Beverly Hills
    Vehicle:
    2024 Prius
    Model:
    LE
    Google part numbers 7189-7501-90 90980-12C78

    Took me a bit to find the right connectors. These will allow you to create an extension cable that you can put between the OEM wiring harness and some of the dash buttons (like on the left side for automatic headlights). This would allow you to tap their 12v and/or ground or whatever you wish to intercept without modifying the factory wiring harness.

    I will not advocate where to buy them but to buy a male and female with pins and with shipping it cost me about $5. Not bad.

    There are slight variations of these connectors which are not compatible but these seem to fit exactly.

    For me I'll be using these to tap the 12v for the button lights that come on with headlights to some custom buttons I've put in for other functions.
     
    #1 soft_r, Jul 3, 2024
    purplePriii likes this.
  2. purplePriii

    purplePriii Member

    Joined:
    May 4, 2023
    163
    68
    1
    Location:
    Canada
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    Have you run any wires from the cabin to the engine bay by chance?

    I'm not sure if you're aware but I tried finding a replacement for the blank switch on the upper left row in my SE but it seems to only fit the fog light dial switch and not any of the standard add ones. All the others are standard.
     
    #2 purplePriii, Jul 4, 2024
  3. Zeromus

    Zeromus Member

    Joined:
    Oct 21, 2023
    371
    177
    4
    Location:
    Ottawa Canada
    Vehicle:
    2024 Prius Prime
    Model:
    SE
    That calls for a 3D printer ;)
     
    #3 Zeromus, Jul 4, 2024
  4. soft_r

    soft_r Junior Member

    Joined:
    Feb 25, 2024
    66
    34
    2
    Location:
    Beverly Hills
    Vehicle:
    2024 Prius
    Model:
    LE
    Should be part # 5553942070C1 I believe

    The fog light dial is a different size than all the other buttons though.
     
    #4 soft_r, Jul 4, 2024
  5. purplePriii

    purplePriii Member

    Joined:
    May 4, 2023
    163
    68
    1
    Location:
    Canada
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    I've tried 3D printing a few inserts to try and convert it to a normal switch size but my designing skills are lacking and I couldn't find any pre-made model.

    Yes, I was just mentioning the fog light dial in case anyone ever reads this. I only have 2 blanks and wanted to get switches for them. I learned the hard way it's a different size than all the other ones.
     
    #5 purplePriii, Jul 5, 2024
    Zeromus likes this.
(You must log in or sign up to post here.)