Replacing TMPS sensor using OBDII scanner tool?

A new Toyota branded sensor correct? Your tool is TPMS capable is it not? In the Toyota software you literally have to sit down with the laptop and manually enter in the numbers of the TPMS units eight digits whatever it is for every wheel and the Toyota software you have to type in each code with a capable TPMS tool you should be able to install the new sensors and then go around to each wheel strike up a relearn of each wheel and it will wake up everything and make the car's chassis computer recognize the new sensors that are in place and so on that'll usually put the light out. So it just depends on how you want to go about it with a newer tool and a relearn procedure with aftermarket capable TPMS wheel sensors that's what I would try to go for like many of the scan tool makers also make TPMS sensors some tools can work with multiple sensors some tools can only work with their brand of sensors etc Just depends how you go Pacific is the company that makes predominantly most of the Toyota wheel sensors and wheel trim I think they may have some upgraded TPMS wheel pieces that are able to relearn and program on the fly like other modern sensors unlike the ones in our Toyota currently.

 

Look at the menus for your linktool and see if it is.
Maybe look on line for your model number.

Are you going to change the sensors yourself? If not, whoever is changing them
SHOULD be able to program them also. It's fairly simple.

I use the XTool D8, and it was simple. I only had to go to the menu for the tpms and then
say "add" sensors. I typed in the numbers for all 4 and it was done.