1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Featured Toyota prius plus 2013 , alot of lights shows up dashboard

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Jass, Aug 5, 2024 at 12:56 PM.

  1. Jass

    Jass New Member

    Joined:
    Yesterday
    1
    0
    0
    Location:
    Ireland
    Vehicle:
    2012 Prius Alpha
    Model:
    Plug-in Advanced
    Hi
    I have toyota prius plus or it's called alpha 2013, suddenly road slippery sign comes on dashboard followed by abs sign ,engine management light, battery lights and a lot of warning signs comes on dashboard I am uploading four photos as well, secondly car is not goings into D from N ,if I try to put D on transmission stick it's stays on N and P sign shows up on the dashboard .it's just hailed now. I did try to reset battery by removing battery leads for 10 min and put back on didn't work ,reset hybrid battery, story remains the same. I would be appreciate, if someone can help or was I similar situation
     

    Attached Files:

    #1 Jass, Aug 5, 2024 at 12:56 PM
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    109,094
    49,587
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    you need to read the trouble codes with a prius aware scanner, like an autel maxi 200.
    in the meantime, check the 12 volt battery health
     
    #2 bisco, Aug 5, 2024 at 8:36 PM
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,220
    15,779
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Those are not always good things to do before reading the trouble codes, because they cause that information to be lost, and then it can be harder to identify the problem.

    If your lights have come back right away, you are fortunate not to have to wait some longer interval to have the information available again.

    If you have access to a scan tool that can read all trouble codes from a Prius, that would be the obvious next step. If you do not, then in the interim you can get some of the trouble codes (those for the brake / traction / stability system, anyway) like this:

    Blink (a/k/a Flash) Codes – How to. | PriusChat

    It will be good to know at least some of the codes ASAP. However, I will not be surprised if some of the codes you can get, by the blink method, will indicate the presence of other codes you can't get that way, in which case, eventually, a suitable scan tool (or a visit with someone who has one) will be in order.
     
    #3 ChapmanF, Aug 5, 2024 at 10:15 PM
(You must log in or sign up to post here.)