200A lifepo and 2kw 220V inverter hooked to traction battery?

Discussion in 'Prius PHEV Plug-In Modifications' started by teranaught, May 16, 2024.

  1. teranaught

    teranaught Junior Member

    Joined:
    May 16, 2024
    5
    0
    0
    Location:
    bremerton
    Vehicle:
    2006 Prius
    Model:
    Two
    4 of these units could add 8 kw demand and 10kwh to EV only use, I have little experience with Prius batteries.
    opinions?

    Voltage controlled to maintain %80 charge you could add as many as you could fit.
    Basically a dc to dc converter add a bridge diode to the ac and let them run.
    When soc gets low the inverter turns on.

    I am a retired electronic tech, I've got 4 weeks with a 2006 Prius.
    I will drive this for a few years then upgrade, that should give me time to learn what to upgrade to.
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    113,841
    51,821
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    sounds like a lot of missionary work. it can and has been done, but only by the best and brightest.
    all the best, please keep us posted!
     
  3. Shootinforamil

    Shootinforamil New Member

    Joined:
    Mar 9, 2025
    13
    1
    0
    Location:
    Nj
    Vehicle:
    2008 Prius
    Model:
    Two
    How is this going?
     
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    113,841
    51,821
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    They said a few years
     
    Shootinforamil likes this.
  5. Shootinforamil

    Shootinforamil New Member

    Joined:
    Mar 9, 2025
    13
    1
    0
    Location:
    Nj
    Vehicle:
    2008 Prius
    Model:
    Two
    They did haha.
     
  6. Shootinforamil

    Shootinforamil New Member

    Joined:
    Mar 9, 2025
    13
    1
    0
    Location:
    Nj
    Vehicle:
    2008 Prius
    Model:
    Two
    I just learned however that the 2019 and up RAV 4 uses a DOUBLE battery pack. Looks like it maybe may be two Prius c packs together. Very exciting and wondering if any coding or adapting can be done. Or possibly even copying it.

    Because Toyota has proven that we’re not crazy to think two nimh batteries can work.
     
    bisco likes this.
  7. MAX2

    MAX2 Senior Member

    Joined:
    Aug 12, 2024
    1,436
    487
    101
    Location:
    Third planet from the Sun
    Vehicle:
    2007 Prius
    Model:
    N/A
    Toyota is not in the business of proving the presence or absence of insanity, that is not their profile.

    Is adding a second battery possible? | Page 6 | PriusChat
     
  8. Shootinforamil

    Shootinforamil New Member

    Joined:
    Mar 9, 2025
    13
    1
    0
    Location:
    Nj
    Vehicle:
    2008 Prius
    Model:
    Two
    Yes, thank you I am aware my information about the two battery was wrong. It is hardly common knowledge. But again I appreciate your help in enlightening myself and the whole internet community!
     
  9. teranaught

    teranaught Junior Member

    Joined:
    May 16, 2024
    5
    0
    0
    Location:
    bremerton
    Vehicle:
    2006 Prius
    Model:
    Two
    17 12.8v 100ah lifepo batteries for auxiliary traction motor 2006 prius, connected through a 200A diode.
    This would act like an auxiliary battery, it would not charge while driving, just supply current when the main battery is lower in voltage.
    You would charge at home, 20h at 5A on a single 15a cord.
    the aux battery can supply 100A at 200-240v but mostly at 210 to 220, so it would only contribute at 50 to %80 soc/main bat.
    this would cost $2k and use all of the spare tire space+ more, for a car that only does 40mph in ev mode.
    but it could drive 30-40 miles between charges.
    It would not be cost effective for a gen 2 but might be for gen 4
     
  10. teranaught

    teranaught Junior Member

    Joined:
    May 16, 2024
    5
    0
    0
    Location:
    bremerton
    Vehicle:
    2006 Prius
    Model:
    Two
    An enable switch wired to the ignition, would automatically disable through a contactor, add a charger interlock so it could not be charged while connected to the main battery.
    When disabled the car would run normal, even when enabled regen will work, but it only works with the NMH.