Hello, I'm resurrecting a Prius. I'm in the stage where i noticed that when i connect the scan tool the check engine light turns on. Removing the scanner will turn off the check engine light. I measured the wires at the obd connector and the brown wire nr 5 does not have ground. Since the car was soaked in water i do not only want to check the ground but the complete connector Al2 and DA2. Can you guide me to the connectors?
I found both connectors and they were in good shape. The problem was with the ground connectors on the valve cover. Gave them a good clean and all was good. Still no start but we are getting there
