1. Attachments are working again! Check out this thread for more details and to report any other bugs.

ABS Lights On Need Help

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by reveal, May 22, 2008.

  1. reveal

    reveal New Member

    Joined:
    May 22, 2008
    6
    0
    0
    Location:
    Houston, Tx
    Vehicle:
    2005 Prius
    <object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/tPiHYXEvZjA"> </param> <embed src="http://www.youtube.com/v/tPiHYXEvZjA" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

    Jumped the OBDII terminals #4 and #13

    Not sure what this code is.. I guess the abs is flashing some sort of morse code can anyone interprete this for me. The Diagnostic Not sure what this code is.. I guess the abs is flashing some sort of morse code can anyone interprete this for me. The Diagnostic screen tells me there are no errors / codes found in Lan mode but I see check engine light on and also the abs light and brake light are constantly on. Help.....
    p.s not too worried about the check engine light as I am of the abs

    This is a 05 prius ........ If you need more info please let me know... this car was in an accident and I am in the process of rebuilding it.. I got everything else right now but just the abs problem....
    Any help would be appreciated if you cannot view the video up above the proper link is


    Thanks in advance...
     
    #1 reveal, May 22, 2008
  2. ZC1

    ZC1 Junior Prius Owner

    Joined:
    Apr 18, 2008
    711
    13
    0
    Location:
    Metro Detroit
    Vehicle:
    2008 Prius
    #2 ZC1, May 22, 2008
  3. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    465
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    the screen diagnostics don't tell you anything about the condition of the car. you need to get an obd2 reader and find out what codes are present to continue. there is definitely more wrong than just the abs.
     
    #3 galaxee, May 22, 2008
  4. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    You can get blink codes out of the ABS and brake system lights
    through a small chicken dance involving the OBDII connector and
    the brake pedal, but you should definitely have the manual to
    interpret it all the right way. Probably best to get a capable
    scantool that can help make sense of it all.
    .
    _H*
     
    #4 hobbit, May 22, 2008
  5. reveal

    reveal New Member

    Joined:
    May 22, 2008
    6
    0
    0
    Location:
    Houston, Tx
    Vehicle:
    2005 Prius
    Hooked up a scanner to it I am pulling this code
    C1253 Malfunction in hydro motor relay circuit .
    Anyone know how to remedy this?
     
    #5 reveal, May 23, 2008
  6. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    465
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    there are 7 different inf codes for that diag code- three digit numbers. knowing that will help to narrow down the cause.
     
    #6 galaxee, May 23, 2008
  7. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,472
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Although it is true that there are seven INF codes for C1253 "Brake Booster Pump Motor Circuit", the potential trouble areas remain the same:

    ABS MTR relay
    ABS MTR2 relay
    Harness and connector
    Brake actuator assy​

    The relays are easy to check. If they are good then it seems likely that the wiring harness was damaged in the accident. If the wiring harness is good then the brake actuator, an expensive part, would probably need to be replaced.​
     
    #7 Patrick Wong, May 23, 2008
  8. reveal

    reveal New Member

    Joined:
    May 22, 2008
    6
    0
    0
    Location:
    Houston, Tx
    Vehicle:
    2005 Prius
    I wrote these codes down before I cleared them:
    Code Subcode
    01-d5 190-30-D
    01-DC 1C6-EF-F
    01-DC 190-53-D


    Thanks in advance
     
    #8 reveal, May 23, 2008
  9. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    Uh -- no. You're still going after the supposed "codes" from
    the MFD-seekrit-diagnostics, which aren't the same thing.
    .
    Has the beeper next to the brake ECU started shrieking at you
    due to low brake fluid pressure? Can you hear the accumulator
    pump run at all when you press the brake pedal a few times?
    .
    _H*
     
    #9 hobbit, May 23, 2008
  10. jayman

    jayman Senior Member

    Joined:
    Oct 21, 2004
    13,439
    640
    0
    Location:
    Winnipeg Manitoba
    Vehicle:
    2004 Prius
    Will a generic OBD2 scantool even read specific ABS codes, or does this require connection to the THHT or Panasonic Toughbook at the dealership?
     
    #10 jayman, May 23, 2008
  11. reveal

    reveal New Member

    Joined:
    May 22, 2008
    6
    0
    0
    Location:
    Houston, Tx
    Vehicle:
    2005 Prius
    I dont hear any beeping... When I do step on the brake a couple of times I do hear something which I am assuming is the pump. The thing is I can clear the lights jumping the sst and depressing the pedals eight times.. .. But once I have the car going at 30+ Miles and step on the brakes the lights come on and stay on. If I clear it it can also come back on few times after switching the car off and on. this is the code the abs scanner pulls
    C1253/53 Hydro Booster Pump Motor Relay Malfunction.
     
    #11 reveal, May 24, 2008
  12. Bill Merchant

    Bill Merchant absit invidia

    Joined:
    May 3, 2005
    4,096
    81
    13
    Location:
    USA | Oregon | Portland area | 97004 |
    Vehicle:
    2007 Prius
    Would you reveal how you have a
    My Car: 2005 Prius
    Package: #2 Touring
    ?

    Knowing your ABS light is on you still drive at 30 MPH?
     
    #12 Bill Merchant, May 25, 2008
  13. reveal

    reveal New Member

    Joined:
    May 22, 2008
    6
    0
    0
    Location:
    Houston, Tx
    Vehicle:
    2005 Prius
    I only did the 30+ Miles in order to test the abs. You can only test the abs above certain speed.
     
    #13 reveal, May 25, 2008
  14. ceric

    ceric New Member

    Joined:
    Oct 30, 2004
    1,114
    53
    0
    Location:
    Fremont, CA
    Vehicle:
    2005 Prius
    Reveal,
    since you are trying to rebuild a Prius, if I were you, I would buy a WorkShop manual and/or Wiring manual of Prius from Toyota. Of course, today a decent OBDII reader costs only about $100 from Autozone. With those, and you have better chance of
    finding out what is wrong. Try eBay for the manuals. Usually they cost about 50% of Toyota MSRP (roughly $100+/-$40).
     
    #14 ceric, May 25, 2008
  15. jayman

    jayman Senior Member

    Joined:
    Oct 21, 2004
    13,439
    640
    0
    Location:
    Winnipeg Manitoba
    Vehicle:
    2004 Prius
    You can subscribe directly to Toyota Techinfo, starting at $10 a day

    http://techinfo.toyota.com

    Or $50 for the month. This will allow you to download the entire series

    Another source - which I use - is All Data. It has the same information as Techinfo

    ALLDATAdiy.com :: Leading Source of Diagnostic and Repair Information

    The standard subscription is $25/vehicle and that is good for an entire year

    I wouldn't give money to an illegal copying crook on ebay
     
    #15 jayman, May 26, 2008
(You must log in or sign up to post here.)