Turn Signal Mirror wiring issue - help?

Are you referring to the mirror glass or the turn signal cover?

I had read reports of some people ending up with gaps between the black mirror body and the cover after installing the turn signal covers. I had no gaps and they look and fit as good as the stock covers. I can see how this could happen, because the KT version does not have ramped catches as I mentioned in the write-up. I had to lift each catch tab with a flat screwdriver while pressing the front of the cover and the mirror body together. The cover had to be guided into place around the body, after which the fit was perfect.

If your mirror glass is shaking then you did not get the lower tabs on the mirror backing plate properly pressed into the white plastic pan/tilt backing plate. The mirror will not fall out with the top clips in place but it will still move about. It is a bit tricky to get the lower clips properly seated again - you have to apply a bit of force to the bottom of the mirror to get them to latch.

 

Can someone suggest where to buy the covers?

Thanks

 

Hi EZW1,
I got mine from

Sigma Automotive – Toyota Hybrid Prius 2004 - 2009 OEM & JDM auto accessories

Edward is the guy there and great to deal with,
The autofold feature is an extra if you're not that pushed about them folding when you lock the car,

Cheers,
Phil.

 

I bought these inexpensive mirror housings with integrated LED signals, and they have worked great so far. They fit quite nicely, and the quality is better than I expected. Attached photos are of my installation.

eBay Motors: Toyota Prius signal side mirror cover pair SAE/3way (item 270309625574 end time Dec-27-08 21:57:37 PST)

 

You can also get them from the source I used (Tommy Leung at KT-dreamworks):

LED side mirror covers LED side mirror covers - KT-DREAMWORK TRADING CO.,LTD.

 

Whatever happened to getting these into the PC shop?

 

I'm wondering the same thing.