1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Got a Question on rear bupper protector

Discussion in 'Newbie Forum' started by boppo, Mar 14, 2009.

  1. boppo

    boppo Active Member

    Joined:
    Mar 11, 2009
    799
    138
    0
    Location:
    Owego, NY
    Vehicle:
    2006 Prius
    Model:
    II

    I just picked one up at my local toyota dealer for 23.00, which I figure was a good deal. I would like to know what you guys used to clean the paint before you stick this bad boy on? I have acetone but think that might be too strong, maybe rubbing alcohol.
    Thanks,
    boppo
     
    #1 boppo, Mar 14, 2009
  2. danl

    danl New Member

    Joined:
    Jan 26, 2009
    231
    6
    0
    Location:
    Boston, MA
    Vehicle:
    2009 Prius
    I just wiped it down with a wet cloth before sticking it on.
     
    #2 danl, Mar 14, 2009
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,199
    6,464
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    I suggest that you carefully read the instructions; I ruined the first one that I tried to put on, so then I had to use another (and these cost more than $23 each, at the time.)
     
    #3 Patrick Wong, Mar 14, 2009
  4. Tripod137

    Tripod137 New Member

    Joined:
    Oct 11, 2005
    145
    0
    0
    Location:
    Long Island
    Vehicle:
    2006 Prius
    I put mine on shortly after I got the car, so all was new/clean. I just used some warm water and a towel. I would suggest to clean the car well (by hand...not a machine car wash) and dry off and apply.
     
    #4 Tripod137, Mar 14, 2009
  5. Eyelawdoc

    Eyelawdoc Junior Member

    Joined:
    Jul 18, 2008
    5
    7
    0
    Location:
    Palmdale, CA
    Vehicle:
    Other Hybrid
    Clean the rear bumper with soap and water. Rinse. Dry with a clean, relatively lint free towel. Then clean the area with rubbing alcohol and allow to air dry well before application.
     
    #5 Eyelawdoc, Mar 14, 2009
  6. boppo

    boppo Active Member

    Joined:
    Mar 11, 2009
    799
    138
    0
    Location:
    Owego, NY
    Vehicle:
    2006 Prius
    Model:
    II
    pat, no instructions, it just came in a toyota bag.
    boppo
     
    #6 boppo, Mar 14, 2009
  7. boppo

    boppo Active Member

    Joined:
    Mar 11, 2009
    799
    138
    0
    Location:
    Owego, NY
    Vehicle:
    2006 Prius
    Model:
    II
    thanks for your reply.
     
    #7 boppo, Mar 14, 2009
  8. boppo

    boppo Active Member

    Joined:
    Mar 11, 2009
    799
    138
    0
    Location:
    Owego, NY
    Vehicle:
    2006 Prius
    Model:
    II
    eyelawdoc, I think I will go with your suggestion as soon as it warms up around here.
    boppo
     
    #8 boppo, Mar 14, 2009
  9. Mickey9201

    Mickey9201 Junior Member

    Joined:
    Mar 14, 2009
    25
    0
    0
    Location:
    Jax, Florida
    Vehicle:
    2007 Prius
    Anyone try using claybar to get all the impurities out of the paint first?
     
    #9 Mickey9201, Mar 14, 2009
  10. patsparks

    patsparks An Aussie perspective

    Joined:
    Jul 12, 2007
    10,664
    567
    0
    Location:
    Adelaide South Australia
    Vehicle:
    2004 Prius
    Model:
    N/A
    Alcohol. You should always clean with alcohol before applying double sided tape to any surface to remove waxes.
     
    #10 patsparks, Mar 15, 2009
  11. boppo

    boppo Active Member

    Joined:
    Mar 11, 2009
    799
    138
    0
    Location:
    Owego, NY
    Vehicle:
    2006 Prius
    Model:
    II
    patsparks, so if I use a little on the bumper and a little for me I should be able to get it on right. :)
     
    #11 boppo, Mar 15, 2009
  12. sdtundra

    sdtundra Senior Member

    Joined:
    Mar 11, 2008
    1,314
    193
    0
    Location:
    Sacramento, CA
    Vehicle:
    2011 Prius
    Model:
    Two
    I jsut claybarred the rear bumper area where it was going to be applied. Clay bar removes impurities as well as stripping any wax on the area. Then just applied it. It's been on for 16,000 miles so far. I'm starting to get a bulge across the middle of it so I may remove and reapply 3 strips of double sided tape to replace the original 2 and add one more down the center.
     
    #12 sdtundra, Mar 15, 2009
(You must log in or sign up to post here.)