1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Automatic Headlights installed & working

Discussion in 'Gen 2 Prius Accessories & Modifications' started by problemchild, May 21, 2008.

  1. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    I didn't spot auto lights in the prototypes.
     
  2. Meir

    Meir New Member

    Joined:
    Mar 18, 2008
    3
    0
    0
    Location:
    San Diego
    Vehicle:
    2008 Prius
    I just finished installing mine and I got the wipers working. You need to connect the kit's purple wire to the thin green wire on the wiper stalk. It's on the same connector as the thick red, white, and green cables and a thin blue cable.

    Also, I installed the rest using problemchild's instructions and now my headlights turn on even if the I turn on the parking lights (due to connecting both wires from the headlights stalk to the same relay). Does everyone else experience that or did I misread the directions?
     
  3. ggcc

    ggcc Member

    Joined:
    Jan 9, 2008
    132
    14
    0
    Location:
    Bay Area, CA
    Vehicle:
    2014 Prius Plug-in
    Model:
    Plug-in Base
    Thank you all for this write up. I am ordering the kit now. I hope I will have some time off to study and do it.
     
  4. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    It will work with HIDs. All this mod is doing is using a photo-cell to turn on the OEM relays.

    I thought the same thing as I was reading so I hooked mine up a different way. I'll update on what connections I made when I get my Prius back from the shop.
     
  5. Uberchin

    Uberchin Junior Member

    Joined:
    Oct 22, 2013
    2
    0
    0
    Vehicle:
    2005 Prius
    Model:
    Two
    Did you find a solution and how did you connect the kit up differently. Thanks.