1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Scan Gauge and MPG readout

Discussion in 'Gen 2 Prius Main Forum' started by CharlesJ, Apr 20, 2009.

  1. CharlesJ

    CharlesJ Member

    Joined:
    Dec 13, 2008
    467
    29
    38
    Location:
    Monterey
    Vehicle:
    2008 Prius
    I am just curious why the scan gauge is not reading four 9s in MPG when it reads 0 RPM such as coasting or only driving on the battery. It does read 4 digits such as 2700MPG, 0 RPM but not 4-9s.
    The only way I can get 4 9s is using the B mode on slowing down.
     
    #1 CharlesJ, Apr 20, 2009
  2. josh2008

    josh2008 Active Member

    Joined:
    Sep 2, 2008
    365
    144
    0
    Location:
    Princeton, WV
    Vehicle:
    2004 Prius
    Model:
    N/A
    This is becuase if you scroll throught and find the GPH reading you will notice it will display 0.01GPH(gallons per hour) being used when the engine is off and the speed is below 41MPH. HOWEVER, if you get up to say 45MPH and let off it will display 9999MPG. It has something to do with how the Scan Gauge interprets whats going on when the engine is off. This topic has been discussed quite a few times over on CleanMPG. Hope this helps you out! :)
     
    #2 josh2008, Apr 20, 2009
  3. CharlesJ

    CharlesJ Member

    Joined:
    Dec 13, 2008
    467
    29
    38
    Location:
    Monterey
    Vehicle:
    2008 Prius

    Yes, it has helped, thanks. :D
     
    #3 CharlesJ, Apr 20, 2009
(You must log in or sign up to post here.)