1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 Cargo Net issues and resolution (panel separation)

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by HTMLSpinnr, Jun 3, 2009.

Page 1 of 11
  1. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Not sure how many of you opted for the cargo net in the 2010.

    I noticed when I took delivery that the cargo net was pulling the plastic panels apart because of the bungee effect.

    [​IMG]

    The instructions and parts provided w/ the cargo net has the port tech install the cargo net through a single panel with a short stud. I.E. they did their job correctly.

    When I had the car in yesterday, one of their senior techs took a look and said they'd see if they couldn't quickly come up with something.

    Turns out the best fix was to drill through a second panel behind the separated one and to use a longer anchor stud. They had this done within 30 minutes and no more separation.

    Photo of fixed:
    [​IMG]


    The tech went ahead and submitted a quality report which will hopefully get the part revised.
     

    Attached Files:

    #1 HTMLSpinnr, Jun 3, 2009
    14 people like this.
  2. a priori

    a priori Canonus Curiosus

    Joined:
    Aug 14, 2007
    3,083
    407
    23
    Location:
    Chicagoland (West)
    Vehicle:
    2010 Prius
    Model:
    V
    I just had mine installed Monday, but I haven't put any pressure on it. I'll go back soon for the rear bumper applique, and I'll ask about it at the time.

    Rick -- if you're able to post an after picture, I'd appreciate it.
     
    #2 a priori, Jun 3, 2009
  3. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Will try to grab one tonight. According to my dealer, dbacksfan's car had the same issue and was fixed in the same way.
     
    #3 HTMLSpinnr, Jun 4, 2009
    1 person likes this.
  4. a priori

    a priori Canonus Curiosus

    Joined:
    Aug 14, 2007
    3,083
    407
    23
    Location:
    Chicagoland (West)
    Vehicle:
    2010 Prius
    Model:
    V
    Thanks! I'd appreciate all of the help possible, because I'm very likely going to face the same issue.
     
    #4 a priori, Jun 4, 2009
  5. IraS

    IraS Member

    Joined:
    May 15, 2009
    165
    50
    0
    Location:
    Austin, TX
    Vehicle:
    2010 Prius
    Model:
    V
    I currently have the cargo net with my 2004 Prius. I wasn't going to buy a new cargo net for my 2010 Prius because I assumed I could just attach my current net to the new car. Aren't the mountings for the top of the cargo net standard in the car? Or are they installed only if you purchase the cargo net? I need to know if I should change my order to include the cargo net.
     
    #5 IraS, Jun 4, 2009
  6. efusco

    efusco Moderator Emeritus
    Staff Member

    Joined:
    Nov 26, 2003
    19,891
    1,192
    9
    Location:
    Nixa, MO
    Vehicle:
    2004 Prius
    Model:
    N/A
    In the 2G, and (I assume) the 3G there are metal anchor points on teh floor of the cargo area that are in every car. But the plastic d-rings must be added and are included with the cargo net when ordered.

    I would suggest you change your order OR wait until we see what fix Toyota comes up with and add it yourself later. It was very simple in the 2G requiring the drilling of 2 holes using a simple paper template as a guide.
     
    #6 efusco, Jun 4, 2009
  7. dbacksfan

    dbacksfan Member

    Joined:
    Apr 7, 2009
    258
    22
    0
    Location:
    Scottsdale, Arizona
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    Yes, thanks to your alert, we made sure to check this issue. I couldn't wait for them to fix it, as I was on a tight time schedule. So I'm having it fixed on Monday.

    Kudos to Avondale Toyota!!! Chuck, my sales manager, immediately committed to having it fixed, noted it in the sales paperwork, and personally introduced me to the assistant service manager and explained the issue. Very professionally handled, indeed.

    I hope others who encounter this issue will be treated with the same respect.

     
    #7 dbacksfan, Jun 4, 2009
  8. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Original pic (putting here as well just for easy comparison):

    [​IMG]

    Fixed pic same angle:

    [​IMG]
     

    Attached Files:

    #8 HTMLSpinnr, Jun 5, 2009
  9. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    The 2G cargo net anchors in a different spot than the 3G. 2G is right below the screw next to where the toneau cover locks in place when extended. 3G is further in mounted to the trim panel itself.

    Full pic of the 3G Cargo net:
    [​IMG]
     

    Attached Files:

    #9 HTMLSpinnr, Jun 5, 2009
  10. a priori

    a priori Canonus Curiosus

    Joined:
    Aug 14, 2007
    3,083
    407
    23
    Location:
    Chicagoland (West)
    Vehicle:
    2010 Prius
    Model:
    V
    Is that report generally available to Toyota Service Managers?

    I see the separation happening already, so I'd like to get my dealer to make the correction. Should I have the Service Manager contact Avondale Toyota, or is there a better way to handle it?
     
    #10 a priori, Jun 5, 2009
  11. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    The Service Manager submitted a quality report through their channels but I don't know if that's distributed to other dealers or just internal to Toyota. I'm also not aware of how long it would take to get propagated down the line.

    Worst case, they could always call Avondale Toyota. They'll surely blame me though ;)
     
    #11 HTMLSpinnr, Jun 5, 2009
    1 person likes this.
  12. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    44,901
    16,125
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Could that possibly to help keep the cargo in the net further into the cargo area?

    I know with the current one, sometimes things get squished when the hatch is closed because the bags are all lined up fairly close to the edge of the hatch. With the top mounted a little further back, maybe that'll tilt the net and help keep the bags away from the hatch.
     
    #12 Tideland Prius, Jun 5, 2009
  13. ggood

    ggood Senior Member

    Joined:
    Jan 17, 2004
    2,436
    517
    0
    Location:
    Houston, TX
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    I decided to just use one of those canvas cargo boxes for that reason (also helped that I already had one and that GST gave me the wrong cargo net).
     
    #13 ggood, Jun 5, 2009
  14. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Tideland, I haven't tossed much into this cargo net, but that was a frequent problem w/ the '04 and that cargo net setup. I'll try it out this weekend.

    I can say this new cargo net is several inches taller, and possibly actually useful for a gallon of milk!
     
    #14 HTMLSpinnr, Jun 5, 2009
  15. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,471
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Fascinating, thanks for providing the resolution to this issue.
     
    #15 Patrick Wong, Jun 17, 2009
  16. DianneWhitmire

    DianneWhitmire High PRIUStess

    Joined:
    Oct 23, 2007
    4,062
    1,123
    64
    Location:
    Laguna Niguel, CA
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    That explains it. Great pics, dear! Thanks... I sure appreciate the heads up too - I have a few cars arriving with cargo nets and hope the LB port facility is ON this issue!!!
     
    #16 DianneWhitmire, Jun 17, 2009
  17. DeanFL

    DeanFL 2010 owner - 1st Prius

    Joined:
    Apr 13, 2009
    1,015
    355
    0
    Location:
    Leesburg Florida USA
    Vehicle:
    2010 Prius
    Model:
    V

    I ordered the cargo net as a port option, but SET Jacksonville did not have it stock. I'll order it later or hopefully from PC Shop.
    Got some groceries yesterday including a small seedless watermelon. All in the Prius cargo area. Well, driving home, I'm hearing clunk....clunk...clunk while braking or accelerating. About a block from the house..."Oh crap - hope that watermelon didn't break open. Thankfully no. But the net would have been a perfect holder - or if I used my head, the rear floor... dope slap.

    Rick - does the tonneau cover still latch with the net attached up higher?
     
    #17 DeanFL, Jun 17, 2009
  18. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    The slot visible in the picture above the anchor point is where the tonneau cover locks in. Problem is I've scratched the panels a few times being clumsy with the cover getting it secured.
     
    #18 HTMLSpinnr, Jun 18, 2009
  19. dakshah

    dakshah Counting the dayz....

    Joined:
    May 19, 2009
    36
    0
    0
    Location:
    SillyCon Valley-ish
    Model:
    III
    Yes - so do I!!! Can I get it addressed at the dealership if it's not before I take possession?
     
    #19 dakshah, Jun 18, 2009
  20. zencat

    zencat Junior Member

    Joined:
    May 23, 2009
    98
    4
    0
    Location:
    Studio City, CA
    Vehicle:
    2010 Prius
    Model:
    V
    Thank you for this. I have a net and I did notice this separation (also the scratching, but that's my fault). I will look into getting this fixed...maybe during my 5000 oil service.
     
    #20 zencat, Jul 1, 2009
(You must log in or sign up to post here.)
Page 1 of 11