1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Trouble inflating tires on GIII

Discussion in 'Gen 3 Prius Main Forum' started by charlotteprius, Jun 16, 2009.

  1. charlotteprius

    charlotteprius New Member

    Joined:
    Jun 8, 2009
    12
    1
    0
    Location:
    Charlotte, NC
    Vehicle:
    2010 Prius
    Model:
    II
    I just checked the air pressure in the tires after a couple of weeks on my 2010 II. Needed some, but found the standard air chuck(s) on my compressor would not fill. Seems the valve stem is smaller and the release pin in recessed further not allowing it to release. Had to push the tire gage very hard to register the pressure. Anyone else having problems or have recommendations?
     
  2. john1701a

    john1701a Prius Guru

    Joined:
    Jan 6, 2004
    12,755
    5,245
    57
    Location:
    Minnesota
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    Nope, the same old pump as with my two previous Prius works as is.

    Sorry, I'm not sure why yours would be different.
    .
     
  3. DeanFL

    DeanFL 2010 owner - 1st Prius

    Joined:
    Apr 13, 2009
    1,015
    355
    0
    Location:
    Leesburg Florida USA
    Vehicle:
    2010 Prius
    Model:
    V

    Checked with my standard digital gauge and added air with standard air compressor fitting - 17" tires.

    The wheel's valve stem appears to be a bit slimmer/smaller diameter but I had zero issues working on mine. Perhaps stop at a tire store nearby and have them check it out...
     
  4. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,317
    10,167
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    No problems with my gauge. But the dual Schrader / Presta head on my floor pump doesn't work well with the wheel covers. The only angle it fits leaves the hose nearly pinched.
     
  5. a priori

    a priori Canonus Curiosus

    Joined:
    Aug 14, 2007
    3,083
    407
    23
    Location:
    Chicagoland (West)
    Vehicle:
    2010 Prius
    Model:
    V
    No problems with mine. I use a portable pump powered by the 12V plug in the car, and I noticed only that it was slightly easier to lock/unlock without letting air out of the tire.
     
  6. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,339
    917
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    I had problems w/ the air compressor nozzle as well - the 60°+ angle versions are hard to seat w/o possibly scratching up the wheel covers.

    I was also surprised to see a lack of green caps - I thought that was an indicator of TPMS, or am I mistaken?
     
  7. equake

    equake Member

    Joined:
    Apr 7, 2009
    155
    7
    0
    Location:
    Los Angeles
    Vehicle:
    2010 Prius
    Model:
    III
    I think the green caps indicate Nitrogen inflation if I'm not mistaken.
     
  8. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,317
    10,167
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    My past green caps were for Nitrogen, from Costco, on a car without TPMS.
     
  9. bestmapman

    bestmapman 04, 07 ,08, 09, 10, 16, 21 Prime

    Joined:
    Apr 8, 2007
    1,289
    242
    3
    Location:
    Kentucky near Cincinnati, OH
    Vehicle:
    2021 Prius Prime
    Model:
    Limited
    No problems here.
     
  10. qbee42

    qbee42 My other car is a boat

    Joined:
    Mar 2, 2006
    18,058
    3,074
    7
    Location:
    Northern Michigan
    Vehicle:
    2006 Prius
    Green caps are for "Nitronized" tires. Obviously most tires are filled with mostly nitrogen.

    Tom
     
  11. NYPrius1

    NYPrius1 Active Member

    Joined:
    Jul 7, 2007
    1,181
    125
    0
    Location:
    Middletown, NY
    Vehicle:
    2007 Prius
    I also Found it a bit harder.