1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 vs. rear facing infant car seat.

Discussion in 'Gen 3 Prius Main Forum' started by nineinchnail1024, Aug 29, 2009.

  1. nineinchnail1024

    nineinchnail1024 New Member

    Joined:
    May 4, 2009
    280
    40
    0
    Location:
    New Orleans
    Vehicle:
    2010 Prius
    Model:
    III
    I put "vs" because it was a bit of a struggle. We bought a very highly rated rear facing infant car seat for our newborn (1st baby. Boy. 7lb. 1oz. 21in. 8/27/09@6:18pm Yes I'm proud!). We all leave the hospital today (I'm stealing their wifi), so I just installed the car seat (I know, last minute, but the baby came early). Wow. I don't know if it's just the carseat we bought, but it BARELY fits in the back seat of the car. I had to put the passenger seat all the way forward and tilt it almost straight up and down. How do people fit these things into anything but a hummer? Lol. The back seat of the prius is by no means small, so I'm surprised how tight a baby seat fits in there. Is it just the brand we bought, or have others had the same issue with the tight fit?

    On another note, the LATCH system is very easy to use.
     
  2. Fujisan

    Fujisan Blizzard Brigade #309

    Joined:
    Jul 11, 2009
    126
    21
    6
    Location:
    Warrington UK
    Vehicle:
    2010 Prius
    Model:
    N/A
    Congratulations! :thumb: :baby:

    Can't speak about rear facing child seats in the Prius...but I do know that some of those rear facing seats can get quite big.

    If I remember back I think I moved the passenger seat forward a touch in my RAV, to make room for the rear facing seat.

    Anyway, well done to you all. :)
     
  3. LoraJ

    LoraJ Active Member

    Joined:
    Jul 4, 2009
    507
    68
    0
    Location:
    NJ
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Plus
    Congratulations. :)
     
  4. 32kcolors

    32kcolors Senior Member

    Joined:
    Jul 14, 2009
    5,683
    952
    124
    Location:
    Redondo Beach, CA
    Vehicle:
    2010 Prius
    Model:
    V
    You always have less room with rear-facing car seats than front-facing. You'll gain a lot more room when you turn it around in one year. We had Graco Snugride which doesn't take up that much room and I still had to shift the front passenger seat forward.

    Congrats.
     
  5. nineinchnail1024

    nineinchnail1024 New Member

    Joined:
    May 4, 2009
    280
    40
    0
    Location:
    New Orleans
    Vehicle:
    2010 Prius
    Model:
    III
    Thanks everyone. We made the trip home today. My wife prefers to ride behind me on the driver's side so that she can play with the baby, so it all worked out.
     
  6. CPSDarren

    CPSDarren CPS Technician

    Joined:
    Aug 9, 2009
    533
    112
    0
    Location:
    Chicago
    Vehicle:
    2010 Prius
    Model:
    II
    Congrats! Wait 'till you get a convertible carseat; many take up even more room when used rear-facing. Some infant seats are a little shorter than others. Also, many now also allow you to leave the handle up while in the car. Some others require you to rotate it back, taking up even more room. Sometimes, installing the carseat in the middle will give you a bit more room between the front seats, though it is more difficult to load and unload and you also can't technically use LATCH there in the Prius.

    On the plus side, rear-facing the safest way to travel- Keep your baby rear facing as long as possible!
     
  7. jburns

    jburns Senior Senior Member

    Joined:
    Oct 13, 2005
    829
    111
    0
    Location:
    Archdale, NC
    Vehicle:
    2010 Prius
    Model:
    III
    Not to mention that the middle of the rear seat is the safest position.
     
  8. cantgoback

    cantgoback Junior Member

    Joined:
    May 26, 2009
    54
    6
    0
    Location:
    santa rosa, ca
    Vehicle:
    2010 Prius
    Model:
    V
    Congratulations!

    We also have a rear-facing infant car seat in our V -- snug ride 32. We have no problems fitting it into our V. Did you adjust the seat handle all the way down? What brand/model seat do you have?
     
  9. Dirk Lerxst

    Dirk Lerxst New Member

    Joined:
    Aug 5, 2009
    51
    6
    0
    Location:
    Phoenix, AZ
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I was just going to mention the middle position myself, not necessarily for the safety but for the space issues. It allows you to take advantage of the gap between front seats.

    Congratulations, NIN1024!
     
  10. JRitt

    JRitt Bio-Medical Equip. Tech

    Joined:
    Jul 2, 2009
    133
    10
    0
    Location:
    St Louis, Mo
    Vehicle:
    2010 Prius
    Model:
    II
    Rear facing car seats are a snug fit an every vehicle except the largest of sedans (like my '95 Impala SS) or a mini van. And Congrats on the new baby.
     
  11. drees

    drees Senior Member

    Joined:
    Oct 31, 2007
    1,782
    247
    0
    Location:
    San Diego, CA
    Vehicle:
    2008 Prius
    Congrats! With our first child I'd definitely recommend putting the seat in the middle of the rear - that way you can even fit two small adults on either side in a pinch.

    With our second, that wasn't an option any more, so we put him on the passenger side.

    While it was a snug fit on our 2008, it wasn't too bad for the front passenger as long as they're not huge (I'm 6' 180lbs and while snug, just barely fit in the front when needed) and we have a pretty large Britax Boulevard.
     
  12. khowardrn

    khowardrn New Member

    Joined:
    Apr 30, 2009
    32
    2
    1
    Location:
    South Florida
    Vehicle:
    2010 Prius
    Model:
    V
    Hi-Congrats on the baby...Our son just turned one on 8/28/09. I agree with the others that the rear facing infant seats are a snug fit, pretty much no matter the vehicle. We used to have a Peg Perego Primo Viaggo installed in our FX35 and it was a very tight fit in there. (I believe the Prius actually has more space/makes better use of the space than our FX35). By the time we got the Prius, he was in a full size Britax Marathon rear facing. In my opinion, it fits great in the back of the Prius. We still haven't turned him forward as he hasn't reached 20 lbs yet, but it does fit rear facing. You just have to keep the seat in the front pretty forward. Good luck.
     
  13. jburns

    jburns Senior Senior Member

    Joined:
    Oct 13, 2005
    829
    111
    0
    Location:
    Archdale, NC
    Vehicle:
    2010 Prius
    Model:
    III
    The middle of the rear seat is safest because it is almost in the exact center of the car. Next is the rear seat on the passenger side. There are more side impact crashes on the drivers side because when you start to pull out into an intersection that is the direction the closest lanes are coming from.
     
  14. SmellyPuppy

    SmellyPuppy New Member

    Joined:
    Aug 30, 2009
    4
    0
    0
    Location:
    Oregon
    Vehicle:
    2010 Prius
    Model:
    IV
    Note that the 2010 Prius only has LATCH on the outboard back seats. Do not use LATCH to secure a carseat in the center. You physically can hook it up in the center using LATCH by using the inner hooks from each side, but this is not recommended and could fail during a crash. The Prius owner's manual mentions this and this is a common issue on lots of cars (at least on our Prius and our Subaru and the child safety seat owner's manuals warn about it).

    Edit: Oh yeah, congratulations!
     
  15. nineinchnail1024

    nineinchnail1024 New Member

    Joined:
    May 4, 2009
    280
    40
    0
    Location:
    New Orleans
    Vehicle:
    2010 Prius
    Model:
    III
    Thanks for all the congrats! Unfortunately, I can't put the car seat in the middle because I have to have the driver's seat all the way back (I'm 6'1") and it would interfere. I also like the LATCH system which only works on the sides. I figured out today that if I raise the handle on the carn seat, it gives the passenger front seat an extra couple of inches to move back, which is fine for all but the tallest passengers. I was just in such a rush at the hospital that I didn't figure it out completely. Thanks for all the kind words!
     
  16. stevetothink

    stevetothink New Member

    Joined:
    Aug 5, 2009
    5
    0
    0
    Location:
    Dirty Jersey
    Vehicle:
    2010 Prius
    Model:
    II
    As SmellyPup stated, the Prius is not equipped to handle a center car seat. The latches are made only for right or left placement. Placement in the middle is completely unsafe, not to mention illegal!

    We use a Graco rear facing seat. We have the front passenger seat up a good ways to fit it. Luckily, my wife is 5'0" but it's not comfortable for me.

    Steve
     
  17. Skoorbmax

    Skoorbmax Senior Member

    Joined:
    Mar 19, 2010
    2,641
    264
    0
    Location:
    Western NY
    Vehicle:
    2010 Prius
    Model:
    II
    I can say with certainty one will fit in the middle. I'm surprised at 6,1" you need the driver's seat so far back that it won't fit, though.

    Latch is fine but you can cinch a car seat down using the "click" mechanism in all seat belts just fine. It may take a bit longer but is perfectly safe.
    Are you sure? Many cars without latch still have the click seatbelts--pull the seatbelt out ALL the way and then let it in slowly and it will click and not let you pull it out again--this is built for car seats. I don't know if the center has that or not but I assume it does.

    Otherwise a car seat I got 5-6 years ago had some clip thing that worked even in cars without that clicking. I would be very surprised if it's illegal to center-mount a car seat in a Gen 3 prius.
     
  18. CPSDarren

    CPSDarren CPS Technician

    Joined:
    Aug 9, 2009
    533
    112
    0
    Location:
    Chicago
    Vehicle:
    2010 Prius
    Model:
    II
    Unless otherwise noted in the owners manual, Toyota generally does not allow you to "borrow" the inside anchors from the outer seating positions in order to install a child safety seat with LATCH in the center seating position. Beyond that, it is perfectly legal and safe to install a child seat in the center using the seatbelt, provided you can get an acceptable fit. I posted a video today of such an installation in the 2010 Prius-

    Graco Nautilus Elite: First Look Review

    Virtually all rear seatbelts in passenger vehicles since 1996 should have a locking feature for child seat installation. Most Toyotas do this in the retractor, others, like Chrysler, often accomplish this in the latchplate. For vehicles before then, a locking clip accessory may be used with some types of seatbelts that do not provide a locking mechanism. Other types of seatbelts may need a heavy duty clip or may not be compatible with child safety seats at all.
     
  19. robertk328

    robertk328 Member

    Joined:
    Jul 13, 2010
    206
    36
    0
    Location:
    Northern Virginia
    Vehicle:
    2014 Prius
    Model:
    Three
    My convertible seat almost didn't fit because the straps just barely made it to the LATCH locations. Otherwise I don't have much trouble with it, but with the kind you have, definitely have to have the handle up. :)
    Our little guy is 9 months tomorrow, I remember those first days when using the car seat!
     
  20. mkyang

    mkyang Junior Member

    Joined:
    Jun 28, 2010
    11
    0
    0
    Location:
    Vancouver, BC
    Vehicle:
    2010 Prius
    Model:
    N/A
    Ironically, I found the Prius' rear seat is breeze to put our Rear Facing Graco Safety Seat in. In fact, it's way easier because the rear door opens much wider than my 96 Impala SS. I just move the front seat foward, and the rear has the leg room that matches S-Class Mercedes.