1. Attachments are working again! Check out this thread for more details and to report any other bugs.

SKS programming for 2005 Prius

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Julieo, Sep 27, 2009.

  1. Julieo

    Julieo New Member

    Joined:
    Sep 27, 2009
    5
    0
    0
    Location:
    Coto de Caza
    Vehicle:
    2005 Prius
    Model:
    N/A
    I just replaced the batteries in my two original SKS key fobs (from when I purchased the car) and now the proximity "smart" portion of opening the doors no longer functions on either remote. All the lock/unlock buttons work on the fob and I can start the car without having the fob in the ignition, but I can't open the doors without hitting the unlock on the fob. That requires me digging thorugh my purse every time I want to unlock my car.
    Did the fob lose it's program when I changed the battery?
    Any suggestions on what to do to make it "smart" from a proximity standpoint?
     
    #1 Julieo, Sep 27, 2009
  2. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,472
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Hi Julie,

    Look for the SMART button which is located under the steering wheel, near your left knee (when you are sitting at the driver's position.) Try pressing that button to see if you can get the system to work.
     
    #2 Patrick Wong, Sep 27, 2009
    2 people like this.
  3. firepa63

    firepa63 Former Prius Owner

    Joined:
    Jul 23, 2005
    1,761
    208
    0
    Vehicle:
    Other Hybrid
    Model:
    N/A
    The button should be in the OUT position for the SKS to be active. There is also a possibility that the door sensor has gone bad.
     
    #3 firepa63, Sep 28, 2009
    2 people like this.
  4. Julieo

    Julieo New Member

    Joined:
    Sep 27, 2009
    5
    0
    0
    Location:
    Coto de Caza
    Vehicle:
    2005 Prius
    Model:
    N/A
    The button was in the OUT position. When I pushed the button IN and then OUT again and tried the fob, it worked! Thanks a million. Your solution saved me a lot of angst. :cheer2:
     
    #4 Julieo, Sep 29, 2009
  5. Julieo

    Julieo New Member

    Joined:
    Sep 27, 2009
    5
    0
    0
    Location:
    Coto de Caza
    Vehicle:
    2005 Prius
    Model:
    N/A
    The combination of your reply and the other reply I received from Patrick Wong really helped! I'm not sure if I would have thought to reset the button if I didn't know it was supposed to be in the OUT position. Thanks for your post and help.
     
    #5 Julieo, Sep 29, 2009
(You must log in or sign up to post here.)