1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replacing tweeters

Discussion in 'Gen 2 Prius Audio and Electronics' started by KCobby, Jan 6, 2010.

  1. KCobby

    KCobby Member

    Joined:
    Aug 7, 2008
    229
    74
    0
    Location:
    NYC area
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    Hi all,

    So I'm working on replacing my OEM audio and I'm stumped right now on how to get those tweeters to stay in the A-pillars. I'm wondering if those of you who've done it can share your mods? I suppose I could affix it with glue or some adhesive, but wouldn't it be difficult to remove later??

    Any help is appreciated. Thanks!
     
    #1 KCobby, Jan 6, 2010
  2. Submarine Dude

    Submarine Dude Junior Member

    Joined:
    Oct 18, 2006
    73
    2
    0
    Location:
    Glendale, AZ
    Vehicle:
    2007 Prius
    Model:
    N/A
    I used a couple dabs of hot melt glue. Holds well and is easily removed if necessary.
     
    #2 Submarine Dude, Jan 6, 2010
  3. don_chuwish

    don_chuwish Well Seasoned Member

    Joined:
    May 1, 2009
    816
    180
    0
    Location:
    Southern Oregon
    Vehicle:
    2007 Prius
    Model:
    II
    If you can do the hot glue it's a nice controllable way to glue. I used super glue and probably shouldn't have, I've since learned that the vapors can be bad for speakers. Depending on the fit, you may get away with electrical tape even.

    - D
     
    #3 don_chuwish, Jan 8, 2010
  4. KCobby

    KCobby Member

    Joined:
    Aug 7, 2008
    229
    74
    0
    Location:
    NYC area
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    Thanks guys for the suggestions - right now they are secured with friction, and a combo of elec tape and a tiny bit of butyl. Should be fine. Will report back when I put them in for good.
     
    #4 KCobby, Jan 8, 2010
  5. don_chuwish

    don_chuwish Well Seasoned Member

    Joined:
    May 1, 2009
    816
    180
    0
    Location:
    Southern Oregon
    Vehicle:
    2007 Prius
    Model:
    II
    That should do fine, and nicely not permanent.

    - D
     
    #5 don_chuwish, Jan 8, 2010
  6. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,080
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Another idea is to use silicone if you are worried about marring the plastics but it will not hold as well as hot glue. Either can work and that is often what we use in our shop. The problem I have with the stock locations is that they will not hold a quality tweeter since most are much to large to fit in there. That is why I had to make custom pods for the dash. If your tweeters will fit then I say grab a glue gun and do it man! :)

    P.S. electric tape will lose it's adhesive traits when subject to much heat and it ends up just making a mess. I would avoid it if possible.
     
    #6 F8L, Jan 9, 2010
(You must log in or sign up to post here.)