1. Attachments are working again! Check out this thread for more details and to report any other bugs.

LCD screen protector

Discussion in 'Gen 2 Prius Main Forum' started by _echo, Aug 8, 2005.

  1. _echo

    _echo Junior Member

    Joined:
    Jun 1, 2005
    83
    7
    0
    Location:
    Orange County
    After many months of compulsively checking my MPG/consumption bargraph, I have noticed that the lower left corner of my LCD has a nice little 'oil spot' on it. Do any of the priuschatters out there have any solutions for protecting the touchscreen? They make a whole variety of LCD protectors for PDA's and such, anyone make something like that specifically for the Prius?

    I currently use inkjet window decal material on my camera, although functional (and fairly cheap), I was wondering if there was a better solution out there. I am most annoyed by the 'moire' pattern that shows up on color LCDs.

    If you want to get REALLY fancy, you can make a CAD drawing (I use PCB software for this,) and print it 1:1 onto that material, that will allow you to cut holes irregular shapes, and most importantly multiple copies. After you do the scribing, strip the surface.

    BTW, if you go with the inkjet window decal stuff, you should soak it in water for a day and then gently rub the printable surface to get rid of the glue. If you don't do that, it's sticky when exposed to moisture.


    Woo hoo 51MPG!!!
     
    #1 _echo, Aug 8, 2005
  2. aaf709

    aaf709 Ravenpaw of ThunderClan

    Joined:
    Apr 23, 2005
    3,862
    18
    0
    Location:
    San Diego, CA
    Vehicle:
    2022 Prius Prime
    Model:
    Limited
    Yes, Sigma Automotive (one of the sponsors) sells one for $16. That sounds pretty good. You can see it here. Just scroll down until you get to Interior.
     
    #2 aaf709, Aug 8, 2005
  3. Edward3

    Edward3 New Member

    Joined:
    Mar 13, 2005
    8
    0
    0
    Location:
    Purcellville, VA
    #3 Edward3, Aug 8, 2005
  4. silentak1

    silentak1 Since 2005

    Joined:
    Jul 1, 2005
    893
    28
    0
    Location:
    LA
    Vehicle:
    2010 Prius
    Model:
    III
    Did you guys get bubbles while applying this?
     
    #4 silentak1, Aug 8, 2005
  5. Edward3

    Edward3 New Member

    Joined:
    Mar 13, 2005
    8
    0
    0
    Location:
    Purcellville, VA
    Nope, I would suggest:
    1. clean the MFD very well
    2. Start from one of the sides verifying the film is stright
    3. use a credit card to apply the rest, and it will just stick to the MFD - look no hands :lol:

    Whatever you do, do not touch the inside part (that goes on the LCD) with your hand, this will leave your finger print there for ever. on the other hand it could be a good way to establish ownership if ever needed.
     
    #5 Edward3, Aug 9, 2005
  6. silentak1

    silentak1 Since 2005

    Joined:
    Jul 1, 2005
    893
    28
    0
    Location:
    LA
    Vehicle:
    2010 Prius
    Model:
    III
    Thanks,

    does it look pretty clear? I remember applying various film protectors to my PDA and it just didn't look right. Some were thick, others too glossy, and some even blurry.
     
    #6 silentak1, Aug 9, 2005
  7. maggieddd

    maggieddd Senior Member

    Joined:
    Jul 8, 2005
    2,090
    13
    0
    Location:
    Boston
    do you get finger prints on the protector when you keep touching it?
     
    #7 maggieddd, Aug 10, 2005
  8. aaf709

    aaf709 Ravenpaw of ThunderClan

    Joined:
    Apr 23, 2005
    3,862
    18
    0
    Location:
    San Diego, CA
    Vehicle:
    2022 Prius Prime
    Model:
    Limited
    #8 aaf709, Aug 12, 2005
  9. Prius Noir

    Prius Noir New Member

    Joined:
    Apr 24, 2005
    31
    0
    0
    Yes, you'll get fingerprints on the protector too. I doubt if there's any such miracle device that doesn't.

    A can of compressed air to blow off any micro pieces of lint helps. Apply as the instructions describes and there should be no bubbles.

    The look is near transparent. It's very thin. Can barely tell it's there. It has a anti-glare, matte finish. Had mine since April and no signs of wear or peeling.

    It's a near perfect fit so align it carefully.
     
    #9 Prius Noir, Aug 12, 2005
  10. jamarimutt

    jamarimutt New Member

    Joined:
    May 4, 2004
    985
    5
    0
    I don't see any advantage to this protector. You'll get the same fingerprints on it and you'll have to clean it just the same.
     
    #10 jamarimutt, Aug 12, 2005
  11. maggieddd

    maggieddd Senior Member

    Joined:
    Jul 8, 2005
    2,090
    13
    0
    Location:
    Boston
    right, what's the point of having it then?
     
    #11 maggieddd, Aug 12, 2005
  12. GoldenGirl

    GoldenGirl New Member

    Joined:
    Jul 29, 2005
    20
    0
    0
    Location:
    USA
    I use the flat of my fingernail on the screen....just the lightest touch is all you need.
     
    #12 GoldenGirl, Aug 12, 2005
  13. aaf709

    aaf709 Ravenpaw of ThunderClan

    Joined:
    Apr 23, 2005
    3,862
    18
    0
    Location:
    San Diego, CA
    Vehicle:
    2022 Prius Prime
    Model:
    Limited
    Ahh, but you can remove protector in order to clean it. You get a dirty fingerprint on the LCD screen itself and it'll be harder to clean.

    It's like having seat covers or a UV filter on a camera lens. Cheap protection.
     
    #13 aaf709, Aug 12, 2005
(You must log in or sign up to post here.)