1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Luggage cover sticks

Discussion in 'Gen 3 Prius Main Forum' started by murigius, Oct 26, 2010.

  1. murigius

    murigius new but learning

    Joined:
    Sep 28, 2010
    21
    2
    0
    Location:
    SF Bay Area
    Vehicle:
    2010 Prius
    Model:
    II
    The sliding luggage cover in my 2010 Prius is very difficult to pull out over the contents of the storage area. I've only had this new/used car a month and am concerned that if I pull it hard enough to window shade it open, I might pull it apart.

    The problem seems to be with the ridges on either side as the cover just as it emerges from its container. I'm wondering 1) if anyone else has had this problem, and 2) should I spray some silicone spray on the ridges so they'll come out more easily.
    Thanks for any suggestions!
     
    #1 murigius, Oct 26, 2010
  2. hyo silver

    hyo silver Awaaaaay

    Joined:
    Mar 2, 2005
    15,232
    1,562
    0
    Location:
    off into the sunset
    Vehicle:
    2004 Prius
    Model:
    N/A
    Instead of silicone spray, you might try paraffin wax. Just rub some on the sticky area and see if that helps. If you can't get the edge of the block in the channel, try a wax crayon.
     
    #2 hyo silver, Oct 27, 2010
  3. firepa63

    firepa63 Former Prius Owner

    Joined:
    Jul 23, 2005
    1,761
    208
    0
    Vehicle:
    Other Hybrid
    Model:
    N/A
    It's under warranty. Let the dealer fix it or replace it.
     
    #3 firepa63, Oct 27, 2010
  4. murigius

    murigius new but learning

    Joined:
    Sep 28, 2010
    21
    2
    0
    Location:
    SF Bay Area
    Vehicle:
    2010 Prius
    Model:
    II
    Thanks, Hyo and Firepa. I'll try the parafin, but if that doesn't work, the dealer needs to fix it as it's still under warranty. They just replaced my driver's door panel... the elbow rest was pushed into the molding and I didn't realize it until last week.
     
    #4 murigius, Oct 27, 2010
  5. jholder

    jholder New Member

    Joined:
    Feb 1, 2007
    39
    6
    0
    Location:
    Tennessee
    Vehicle:
    2010 Prius
    Model:
    IV
    Yeah, it may be mis-wound, jamming it. I'd try to pull it gently....then have the dealer swap if that doesnt work. Those are handy, as they cover up all your stuff in the back, plus diverts the sun from baking your things.
     
    #5 jholder, Oct 27, 2010
  6. energyandair

    energyandair Active Member

    Joined:
    Jun 9, 2009
    905
    339
    0
    Location:
    Victoria BC Canada
    Vehicle:
    2010 Prius
    Is it the container sitting with the right side up?

    edit: Just checked and it only goes one way. So much for that theory!
     
    #6 energyandair, Oct 27, 2010
  7. Joe166

    Joe166 New Member

    Joined:
    Dec 19, 2009
    720
    96
    0
    Location:
    South Florida
    Vehicle:
    Other Hybrid
    Model:
    V
    I would go to the dealer before I started using any lubricant. If it is going to stain or rip, let them do it so they can't claim it was your fault. Although this is just like the cheapest window coverings available (I needed to replace a roller shade and was only able to find them at WalMart and Home Depot [or Lowes]), I bet they charge an arm and a leg for a replacement.

    On one occasion, I had a sticky cover, it came out and has never recurred, but if this is continual, I bet they are going to have to replace it.
     
    #7 Joe166, Oct 27, 2010
  8. Michaelvickdog123

    Michaelvickdog123 New Member

    Joined:
    Aug 3, 2010
    332
    21
    0
    Location:
    US
    Vehicle:
    2010 Prius
    Model:
    IV

    Had a similar problem on another (non-Prius) car. My solution was to pull the cover out as far as it would go (ie all the way to the stops), and then ever so carefully (and slowly), let it retract into the cover holder. While slowly letting it retract, make sure to watch the end of the cover to make sure they back into the holder in a square (not crooked) fashion.

    If you can't get it to work right, as another poster mentioned - take it back to the dealership and I'm sure they will swap it out for you.
     
    #8 Michaelvickdog123, Oct 27, 2010
  9. Penny's Dad

    Penny's Dad New Member

    Joined:
    Dec 2, 2009
    421
    46
    0
    Location:
    Orlando Fla
    Vehicle:
    2010 Prius
    Model:
    II
    I never had any problem with mine. It has always worked normal. It won't let you install upside down...so I would just have the dealer replace it rather than worry about it.
     
    #9 Penny's Dad, Oct 27, 2010
(You must log in or sign up to post here.)