1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gen III - Why the plastic covers for alloy wheels?

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Fstr911, Oct 4, 2009.

Page 2 of 2
  1. walterm

    walterm Active Member

    Joined:
    May 17, 2007
    466
    202
    34
    Location:
    NJ
    Vehicle:
    2022 Prius Prime
    Model:
    Limited
    You can get center caps with the Toyota logo on them from numerous sources (like metrotpn.com) and do just that.

    http://www.metrotpn.com/ProductDetails.aspx?CollectionID=25&ProductID=198&SortIndex=31
    (all one line, in case it gets split in displaying)

    I'm also wondering whether it would look better if the spokes were painted to match the body color (mine is Barcelona Red), but that's hard to tell before trying it and hard to undo if you don't like it after it's done...
     
    #21 walterm, Oct 8, 2009
  2. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    44,830
    16,066
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    whoa.. new avatar. Didn't recognise you and was wondering who was this person that's replying to my post??

    lol... ridonkulous... kids these days. Hope you caught up in their lingo.
     
    #22 Tideland Prius, Oct 8, 2009
  3. Rokeby

    Rokeby Member

    Joined:
    Jan 21, 2008
    3,033
    708
    75
    Location:
    Ballamer, Merlin
    Vehicle:
    2008 Prius
    Here's a picture of our Amapola:

    Amapola RIms.jpg

    Powdercoated Touring rims, not painted. Three step process, ~$600:
    * base coat
    * metalflake coat
    * clear top coat

    Very difficult to match the metalflake flake size, mine's a bit too large.

    Still, we like the look very much. Get's lots of stares, thumb's up, and
    cell phone pix, even when were doing 60 mph!
     
    #23 Rokeby, Oct 8, 2009
    2 people like this.
  4. Fstr911

    Fstr911 Member

    Joined:
    Oct 2, 2009
    235
    55
    3
    Location:
    Florida
    Vehicle:
    2012 Prius v wagon
    Model:
    III
    Sweet looking wheels Rokeby
     
    #24 Fstr911, Oct 8, 2009
    1 person likes this.
  5. Lucky2beme

    Lucky2beme 1st Time Hybrid Owner

    Joined:
    Mar 11, 2009
    85
    10
    0
    Location:
    Escondido, CA
    Vehicle:
    2010 Prius
    Model:
    III
    My plastic covers already have a crack in them! :(

    Yesterday my tire pressure signal cam on!!!

    Found I had a screw way up in the edge!

    They say it can't be repaired and there is no road hazard on new car tires!!!

    So dealer wanted me to pay $150 + bal etc. because, "I
    was the one who ran over the screw!!!!

    My DH plugged it with a $5 kit and it is holding just fine!
     
    #25 Lucky2beme, Oct 9, 2009
  6. danielarichman

    danielarichman Junior Member

    Joined:
    Jan 20, 2011
    26
    7
    2
    Location:
    Seattle, WA (Ballard)
    Vehicle:
    2023 Prius Prime
    Model:
    XLE
    On Saturday, I took delivery of my 2011 Prius Five (black exterior, dark gray leather interior). I discovered to my delight that the 17" wheels have no wheel covers but are solid. They are nearly identical in design to the wheel covers of the smaller wheels, but the spokes are straight, with no bend toward the outside edge.

    That would probably be an expensive solution, though.



     
    #26 danielarichman, Feb 7, 2011
  7. BrettS

    BrettS Active Member

    Joined:
    Jan 18, 2011
    290
    135
    0
    Location:
    Orlando
    Vehicle:
    2010 Prius
    Model:
    III
    I took the covers off for a little while, but honestly I wasn't impressed with the allow wheels underneath... even with a nice cover for the whole I like them better with the covers... and if it improves my economy then that's even better:)
     
    #27 BrettS, Feb 7, 2011
(You must log in or sign up to post here.)
Page 2 of 2