1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Ding on front bumper

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Rory Tate, Jun 1, 2011.

  1. Rory Tate

    Rory Tate New Member

    Joined:
    Jun 1, 2011
    2
    0
    0
    Location:
    Canadian
    Vehicle:
    2010 Prius
    Model:
    Three
    I ran over a plastic bucket. The bucket pushed a little bump, about. 1/8inch high and about 1 inch in diameter on the center of the bumper. I hate it.

    What's the best solution to removing it? Very grateful for any suggestions.

    Rory Tate
    Canadian, OK.
     
    #1 Rory Tate, Jun 1, 2011
  2. firepa63

    firepa63 Former Prius Owner

    Joined:
    Jul 23, 2005
    1,761
    208
    0
    Vehicle:
    Other Hybrid
    Model:
    N/A
    See if you can pull the "ding" out with a suction cup. The bumper cover is just plastic.
     
    #2 firepa63, Jun 1, 2011
  3. phoenixgreg

    phoenixgreg Senior member

    Joined:
    Apr 7, 2010
    1,157
    289
    66
    Location:
    Phoenix
    Vehicle:
    2010 Prius
    Model:
    II
    Is the ding on the "lower lip"? I did that too and had to carefully "back tap" it out by first removing the lower black cover plate to get behind it. With careful pressure, I got most of the ding out and then purchased a brush bottle of matching touch-up paint from the dealer ($12). I carefully bushed over the ding and for the most part, I don't see it, but mine is a dark color which makes a difference. If you have a lighter color, it could stand out.

    Someone here posted a bumper fix using a hair dryer too. Good luck
     
    #3 phoenixgreg, Jun 2, 2011
  4. rrolff

    rrolff Prius Surgeon

    Joined:
    Aug 19, 2009
    1,610
    246
    0
    Location:
    So Cal
    Vehicle:
    2010 Prius
    Model:
    III
    You can try the suction cup method - but you will need to heat the area first (heat gun) - DO NOT overheat the area - get it warm, then try to pull it out. If that doesn't work, you'll need to pull off the bumper and go at it fro the back...
     
    #4 rrolff, Jun 2, 2011
  5. Rory Tate

    Rory Tate New Member

    Joined:
    Jun 1, 2011
    2
    0
    0
    Location:
    Canadian
    Vehicle:
    2010 Prius
    Model:
    Three
    Thank you very much for your responses. However, I left out a very important detail: the plastic bucket went under the bumper and pushed the 'ding' upward, causing a pimple-like effect on the upper surface of the bumper. In some ways this may be easier to fix but I don't know.

    Further suggestions?
     
    #5 Rory Tate, Jun 3, 2011
  6. itonarely

    itonarely Junior Member

    Joined:
    May 3, 2011
    36
    12
    0
    Location:
    Miami
    Vehicle:
    2016 Prius
    Model:
    Two
    Coincedentally, I just happened to find several videos on youtube yesterday showing several people removing dents from their bumpers. You might want to take a look there to see if you find any situations similar to yours. In the videos I saw, it appeared that applying heat was key to resolving the issue...
     
    #6 itonarely, Jun 3, 2011
  7. usedtoyota

    usedtoyota New Member

    Joined:
    Jun 3, 2011
    5
    0
    0
    Location:
    Pakistan
    Vehicle:
    2006 Prius
    Model:
    N/A
    You better find some mechanic rather than finding solution here. Because this would ease your problem no matters you spend some money on it.
     
    #7 usedtoyota, Jun 3, 2011
  8. macmaster05

    macmaster05 Senor Member

    Joined:
    Sep 27, 2009
    4,050
    729
    5
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Two
    pics, breh
     
    #8 macmaster05, Jun 3, 2011
(You must log in or sign up to post here.)