1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Adjusting the idle ??

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by rkp, Jul 7, 2011.

Page 2 of 2
  1. rkp

    rkp New Member

    Joined:
    May 15, 2011
    14
    1
    0
    Location:
    Rochester
    Vehicle:
    2011 Prius
    Model:
    Three
    Thanks to all who piped in on this!! I went out the next day after this post and low and behold the arrows do stop when sitting at the light. I was never worried about the brake lights using energy. This is cool. I will now concentrate on getting 644 mi on a tank. :)
     
    #21 rkp, Jul 11, 2011
  2. cit1991

    cit1991 New Member

    Joined:
    Apr 5, 2010
    289
    95
    0
    Location:
    Tulsa, OK
    Vehicle:
    2010 Prius
    Model:
    IV
    The idle adjustment screw is a few inches in front of the distributor, right by the end of the throttle cable. You have to reach around the alternator to get to it, so if it's running, be sure not to get tangled up in the drive belt.

    :)
     
    #22 cit1991, Jul 13, 2011
    3 people like this.
  3. tumbleweed

    tumbleweed Senior Member

    Joined:
    Oct 3, 2005
    4,067
    687
    0
    Location:
    Eastern Oregon
    Vehicle:
    2010 Prius
    Model:
    V
    A ScanGauge monitoring the HV battery current will show you need to push the brake firmly while stopped to minimize current flow. Not so hard as to activate the HSA (which deactivates itself by the way) but firmly.
     
    #23 tumbleweed, Jul 13, 2011
  4. mad-dog-one

    mad-dog-one Prius Enthusiast

    Joined:
    Dec 31, 2009
    1,181
    420
    0
    Location:
    Whereabouts Unknown
    Vehicle:
    2017 Prius Prime
    Model:
    ----USA----
    Your problem is not the ICE idle speed. The Gen 3 Prius will roll from a stop when the ICE is not running, using the electric traction system. Adjusting the ICE idle speed, that is computer controlled, will have no effect.
     
    #24 mad-dog-one, Jul 13, 2011
  5. piusprius

    piusprius New Member

    Joined:
    Jun 23, 2011
    1
    0
    0
    Location:
    Bellevue,wa.
    Vehicle:
    2010 Prius
    Model:
    Two
    You need to take the wing nut off first to get the air cleaner off.
     
    #25 piusprius, Jul 13, 2011
(You must log in or sign up to post here.)
Page 2 of 2