1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gasket pinched out on 2011 Prius

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by goffja2000, Mar 11, 2012.

  1. goffja2000

    goffja2000 Junior Member

    Joined:
    Feb 22, 2012
    4
    0
    0
    Location:
    Green Bay
    Vehicle:
    2011 Prius
    Model:
    Two
    Hello,

    On our new 2011 Prius with about 2000 miles on it I noticed a gasket kind of squished out from the engine. I'm going to take it in to have the dealer take a look. I was just looking for opinions on whether it should be addressed right away or if it should be ok to wait until the 5000 mile service. Engine oil level is staying right on the full line and the coolant level looks fine so everything appears to be holding level. Thanks for taking a look,

    Jason
     

    Attached Files:

  2. goffja2000

    goffja2000 Junior Member

    Joined:
    Feb 22, 2012
    4
    0
    0
    Location:
    Green Bay
    Vehicle:
    2011 Prius
    Model:
    Two
    Thanks,

    Didn't catch that thread before. I will leave it there and just have it noted at the 5,000 mile service.
     
  3. eseymour72

    eseymour72 Junior Member

    Joined:
    Feb 26, 2012
    46
    6
    0
    Location:
    Lincoln City, OR
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    This is totally normal and it's not a gasket but rather Toyota sealant. Toyota uses a sealant to seal many areas and it is quite common to see it squeeze out. It will hurt nothing and sometimes a little more is better than less. Don't pull it off or scrape it off as you could interrupt the seal.
     
  4. Judgeless

    Judgeless Senior Member

    Joined:
    Jun 30, 2009
    1,821
    255
    0
    Location:
    Cleveland, OH
    Vehicle:
    2010 Prius
    Model:
    IV