1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Doors Not Unlocking

Discussion in 'Gen 2 Prius Main Forum' started by frankhunt, Jun 11, 2012.

  1. frankhunt

    frankhunt New Member

    Joined:
    Jun 11, 2012
    6
    0
    0
    Vehicle:
    2007 Prius
    Model:
    Three
    When I lock the doors with either the handle button or the key fob, everything works fine.
    When I unlock with the fob, only the driver's door unlocks unless I press unlock several times.
    When I unlock by touching the driver side door handle, only the driver door unlocks.
    From the passenger door handle, all doors unlock.
    The rear deck behaves the same as the driver door.

    Ideas anyone?
     
    #1 frankhunt, Jun 11, 2012
  2. kimberlylgale

    kimberlylgale New Member

    Joined:
    Dec 21, 2011
    2
    0
    0
    Location:
    Phoenix, AZ
    Vehicle:
    2010 Prius
    Model:
    II
    This happened to me too. I replaced the batteries in the key fob and it fixed things. When you replace the batteries just take the key fob to a Batteries Plus type store and they will do it for you. It was less than $5 and the Toyota dealership quoted me $45.
     
    #2 kimberlylgale, Jun 11, 2012
  3. alekska

    alekska Active Member

    Joined:
    Feb 14, 2010
    435
    138
    0
    Location:
    Atl
    Vehicle:
    2005 Prius
    This is perfectly normal. In fact, this is the way I prefer it to be set in my 2005 Prius.
    There is a way to change settings so touching the driver's door will unlock ALL doors, but I don't remember how - its in the manual.

    Best,
    - Alex

    Ideas anyone?[/quote]
     
    #3 alekska, Jun 11, 2012
  4. frankhunt

    frankhunt New Member

    Joined:
    Jun 11, 2012
    6
    0
    0
    Vehicle:
    2007 Prius
    Model:
    Three
    Cool beans. I was thinking that might be the problem given the age of the car. Will give it a try.
     
    #4 frankhunt, Jun 11, 2012
  5. frankhunt

    frankhunt New Member

    Joined:
    Jun 11, 2012
    6
    0
    0
    Vehicle:
    2007 Prius
    Model:
    Three
    [/quote]

    Could be "perfectly normal" but two weeks ago all doors unlocked so something changed. Magic? Gremlins? Batteries?
     
    #5 frankhunt, Jun 11, 2012
  6. JimboPalmer

    JimboPalmer Tsar of all the Rushers

    Joined:
    Apr 14, 2009
    12,470
    6,862
    2
    Location:
    Greenwood MS USA
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    You can configure a Gen 2 so that is the behavior, yes.

    http://www.toyota.com/t3Portal/document/om/OM47568U/pdf/02-01.pdf
    Page 14 of the PDF, Page 32 of the manual

    I think you are in single Door Unlocking mode

     
    #6 JimboPalmer, Jun 11, 2012
  7. frankhunt

    frankhunt New Member

    Joined:
    Jun 11, 2012
    6
    0
    0
    Vehicle:
    2007 Prius
    Model:
    Three
    Wonder how I got the car into that mode? Strange since since I bought the car in 2007 all doors have always unlocked all the time. Always. I guess it's RTFM time. :)
     
    #7 frankhunt, Jun 11, 2012
  8. frankhunt

    frankhunt New Member

    Joined:
    Jun 11, 2012
    6
    0
    0
    Vehicle:
    2007 Prius
    Model:
    Three
    Went through the reprogramming steps and now it works just fine. I carry my fob in my back pocket so it is possible that I "butt programmed" it.
     
    #8 frankhunt, Jun 11, 2012
  9. HaroldW

    HaroldW Active Member

    Joined:
    Mar 17, 2012
    716
    95
    0
    Location:
    Grand Forks BC Canada
    Vehicle:
    2014 Prius
    Model:
    Three
    I don't believe the fob has anything to do with it. The way you described the door sequence is how it comes from the factory! You can change it as described in the manual only? :) H
     
    #9 HaroldW, Jun 11, 2012
  10. frankhunt

    frankhunt New Member

    Joined:
    Jun 11, 2012
    6
    0
    0
    Vehicle:
    2007 Prius
    Model:
    Three
    The fob has everything to do with it. I'm convinced that I sat on the fob and inadvertently pressed the lock + alarm buttons which re-programmed the unlock sequence. I have since reset it and now it works just like it has for the past five years.
     
    #10 frankhunt, Jun 11, 2012
(You must log in or sign up to post here.)