1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Question about Keyless Entry (Comfort Access)

Discussion in 'Prius c Main Forum' started by col127, Nov 29, 2012.

  1. col127

    col127 Member

    Joined:
    Apr 4, 2012
    345
    19
    0
    Location:
    Illinois
    Vehicle:
    2012 Prius c
    Model:
    Three
    Hey All,

    Question about the keyless entry (comfort access) feature.

    I know I can unlock all the doors on the PASSENGER's side door handle, but how do I do that in the DRIVER's side door handle?

    I always end up opening my door on the driver's side then having to push the unlock button inside the car to open up my wife's door. Is there a better way other than using the key? Am I missing something?

    Or, can I set the default action for my key to just unlock all doors when I grab the driver's side door handle? Thanks!
     
    #1 col127, Nov 29, 2012
  2. DKTVAV

    DKTVAV Active Member

    Joined:
    Jun 3, 2012
    510
    101
    0
    Vehicle:
    2012 Prius c
    Model:
    Four
    I believe I've searched for the same feature to find out it doesn't exist. You can only do it with the remote.
     
    #2 DKTVAV, Nov 29, 2012
  3. mkwan723

    mkwan723 Junior Member

    Joined:
    May 2, 2012
    32
    6
    0
    Location:
    Ottawa
    Vehicle:
    2012 Prius c
    Model:
    N/A
    If you push the 'unlock' button on your remote twice, it will unlock all doors.
     
    #3 mkwan723, Nov 29, 2012
  4. DKTVAV

    DKTVAV Active Member

    Joined:
    Jun 3, 2012
    510
    101
    0
    Vehicle:
    2012 Prius c
    Model:
    Four
    You can change it to one push only.
     
    #4 DKTVAV, Nov 29, 2012
  5. col127

    col127 Member

    Joined:
    Apr 4, 2012
    345
    19
    0
    Location:
    Illinois
    Vehicle:
    2012 Prius c
    Model:
    Three
    Shame there's no other way other than using the remote :(
     
    #5 col127, Nov 29, 2012
  6. Jzerocsk

    Jzerocsk Member

    Joined:
    Nov 28, 2012
    108
    31
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    Don't know if it works on the Prius C, but this worked on the V: hold both the lock and unlock buttons on the remote for 5 seconds...the car will beep a few times. After that, grabbing the driver door handle unlocks all the doors.
     
    #6 Jzerocsk, Nov 29, 2012
  7. shuiwm

    shuiwm Junior Member

    Joined:
    Nov 11, 2012
    14
    2
    0
    Location:
    New York, NY
    Vehicle:
    2012 Prius c
    Model:
    Four
    Try this... it work for me

    http://www.toyota.com/t3Portal/document/om/OM52B58U/pdf/sec_1-3.pdf

    Switching the door unlock function

    It is possible to set which doors the entry function unlocks using the wireless remote control.
    Turn the “POWER” switch off.
    When the indicator light on the key surface is not on, press and
    hold unlock button for about 5 seconds while pressing and holding lock button
    .
    The setting changes each time an operation is performed, as shown below.
    (When changing the setting continuously, release the buttons, wait for at
    least 5 seconds, and repeat step 2.)

    Unlocking doors Beep

    Holding the driver's door handle
    unlocks only the driver's door. Exterior: Beeps 3 times, Interior: Beeps once
    Holding the front passenger’s door handle
    unlocks all the doors.

    Holding either front door handle Exterior: Beeps twice, Interior: Beeps once
    unlocks all the doors.
     
    #7 shuiwm, Nov 29, 2012
    seckwielen likes this.
  8. col127

    col127 Member

    Joined:
    Apr 4, 2012
    345
    19
    0
    Location:
    Illinois
    Vehicle:
    2012 Prius c
    Model:
    Three
    Thanks everyone! Worked like a charm :)
     
    #8 col127, Nov 29, 2012
(You must log in or sign up to post here.)