1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Compatible EVSE from other OEMs?

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by uropip, Aug 21, 2013.

  1. uropip

    uropip Member

    Joined:
    Jul 27, 2013
    138
    38
    0
    Location:
    S.E. MASS
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    Is there a list somewhere of EVSEs that are compatible for other makes (Leaf, Volt, Ford, etc) for the bargain shoppers lookin for another EVSE?

    LG-MS870 ? 4

    Most likely Either picking up a Leviton or that Clipper Creek one but if a used OEM one shows up for the right price.. It'd be good to have the info out there

    LG-MS870 ? 4
     
  2. Tracksyde

    Tracksyde Member

    Joined:
    Sep 21, 2011
    1,429
    761
    0
    Location:
    So Cal
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    I think it was Jeff N and devprius, but they tested a bunch of EVSEs (Leaf, Volt, PiP) and if I recall, the 2011 and earlier Volt EVSEs dont work with the PiP. The 2012 Volt EVSE does and I think its pretty cheap, like $300 or something like that.

    Yeah, Jeff N.. here's his matrix of what was tested and what worked/didnt work

    Charging PIP using Chevy Volt 110V charge cord | Page 2 | PriusChat

    EDIT: The stock Chevy EVSE is $369, it looks like

    2013 Volt Battery Charger Cable - 110V - 23145307 - Electronics - Volt - 2013 - Chevrolet - by Genuine

    EDIT: Sorry, I guess I was wrong.. looks like the 2011-2012 Chevy EVSE didnt work for the PiP at all
     
  3. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    The Volt ESEVs are junk. I wouldn't buy one even if the 2013 model works. The 2011-2012 units were really bad. I had my PIP ESEV upgraded to 220v for use on my Volt because I didn't trust my OEM unit. lol
     
  4. markabele

    markabele owner of PiP, then Leaf, then Model 3

    Joined:
    Mar 27, 2012
    5,084
    1,782
    1
    Location:
    Nebraska
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    Really? What goes bad on them?
     
  5. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    They mainly stop working and show a fault light. Some have burnt cords or connector prongs. GM apparently switch manufacturers for the 2013 units. If the new ones are indeed made by Clipper Creek then they should be good quality.

    Here is how you can I'd the different model years.
    What the new 2013 L1 EVSE looks like
     
  6. JohnSNY

    JohnSNY Member

    Joined:
    Oct 29, 2012
    36
    26
    0
    Location:
    Long Island, NY
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Drake likes this.
  7. F8L

    F8L Protecting Habitat & AG Lands

    Joined:
    Aug 14, 2006
    19,011
    4,081
    50
    Location:
    Grass Valley, CA.
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    The Clipper Creek unit listed above is very well regarded.
     
  8. Drake

    Drake Junior Member

    Joined:
    Jul 18, 2012
    71
    16
    0
    Location:
    Quebec, Canada
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    I have bought the Clipper Creek LCS-25 too and it works fine with my PiP ;)
     
  9. Francos

    Francos Member

    Joined:
    Feb 27, 2013
    118
    18
    0
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    How much AMP can the PIP draw?

    Another alternative may be Bosch's Power Max $449 with 16A/12 feet cord.
     
  10. markabele

    markabele owner of PiP, then Leaf, then Model 3

    Joined:
    Mar 27, 2012
    5,084
    1,782
    1
    Location:
    Nebraska
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    From the wall? Or during acceleration?
     
  11. devprius

    devprius /dev/geek

    Joined:
    Jan 2, 2006
    979
    291
    0
    Location:
    San Francisco Bay Area, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    First of all, are you talking about a Level 1 (120V) or Level 2 (240V) EVSE?

    An L1 EVSE draws about 12A from the wall. The L2 EVSE will draw about 10A since the car can only pull a maximum of about 2.2 to 2.3 kW.

    I have a Nissan-branded Aerovironment EVSE-RS that works just fine with the PiP (or the RAV4-EV). While it can deliver up to 7.2kW (30A), the PiP still only pulls about 10A.