1. Attachments are working again! Check out this thread for more details and to report any other bugs.

A place to check for rust starting

Discussion in 'Generation 1 Prius Discussion' started by ChapmanF, Jul 13, 2014.

  1. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,302
    15,094
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I just happened to spot some tiny bubbles around the edges of the plastic sill at the driver's door. The edges apparently hold on to some salty winter gunk.

    sill.jpg

    There's more to see after pulling up the plastic sill. Still, the metal seems solid enough, if I can get this wire-wheeled clean and primed and painted soon.

    sillout.jpg

    The driver's door is the only one showing any sign of this.

    -Chap
     
    #1 ChapmanF, Jul 13, 2014
    Mendel Leisk likes this.
  2. ftl

    ftl Explicator

    Joined:
    Jun 2, 2009
    1,812
    790
    0
    Location:
    Long Island NY
    Vehicle:
    2012 Prius c
    Model:
    Three
    #2 ftl, Jul 13, 2014
  3. yankkesrule

    yankkesrule Junior Member

    Joined:
    Jan 7, 2013
    21
    2
    0
    Location:
    Masshole
    Vehicle:
    2001 Prius
    Model:
    N/A
    I've also got some on the bottom of the front fender. A bunch of leaves got stuck in there and caught a bunch of dirt. Noticed them after I noticed some bubbling at the bottom (skinniest part of the fender). Pulled the leaves and cleaned the dirt out. Leaves and dirt were wet though it hadn't rained in weeks. Debris was holding moisture there causing rust. Another thing to keep an eye on. You could see the leaves with the door open.
     
    #3 yankkesrule, Jul 14, 2014
  4. messenger

    messenger Junior Member

    Joined:
    May 18, 2014
    30
    1
    0
    Location:
    Fairfield, IA USA
    Vehicle:
    2014 Prius
    Model:
    Three
    It's best to remove the plastic fender liner at the lower back of the front fenders then you can really get in there and clean / wash it out and repaint (both of mine were full of junk). Also check at the bottom front of the rear wheel wells.
     
    #4 messenger, Jul 15, 2014
(You must log in or sign up to post here.)