1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Wipers Not Working, But Can Hear Motor Running

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Jonathan Harrell, Jan 5, 2015.

  1. Jonathan Harrell

    Jonathan Harrell New Member

    Joined:
    Jan 5, 2015
    4
    0
    0
    Vehicle:
    2007 Prius
    Model:
    II
    Weather got cold last night and froze everything. When I went to start my wife's car she had left the wipers in the on position the night before and I did not notice it. Once I turned the car on, the wipers went to start moving but were frozen. Once I realized it I quickly switched it to the off position, but it was too late. After defrosting everything and cleaning the windshield, the wipers will not work. I thought first it was a blown fuse so I switched it out with a new one, but still no luck. After my engine turned off I could hear the wiper motor running but no moving on the wipers. I have checked the nuts that hold the base of the wipers in place and they are tight. Does any body have any suggestions for me. I have a 2007 Prius as well. Thanks in advanced for any help.

    Jonathan
     
    #1 Jonathan Harrell, Jan 5, 2015
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Remove the wiper arms and see if the gears are stripped. While the arms are removed, look at the motor and see if it turns.
     
    #2 JC91006, Jan 5, 2015
  3. Jonathan Harrell

    Jonathan Harrell New Member

    Joined:
    Jan 5, 2015
    4
    0
    0
    Vehicle:
    2007 Prius
    Model:
    II
    Is
    Is that something hard to do? I know there are nuts that hold it down. The wipers also move together freely, that so may be it.
     
    #3 Jonathan Harrell, Jan 5, 2015
  4. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    I thought you said you check the nut that holds the wiper in place? Remove that nut, take the wiper arm off and look at it. When you turn the wiper on, that bolt where the nut fits onto should move.
     
    #4 JC91006, Jan 5, 2015
  5. Jonathan Harrell

    Jonathan Harrell New Member

    Joined:
    Jan 5, 2015
    4
    0
    0
    Vehicle:
    2007 Prius
    Model:
    II
    Ok well the bolt does not move. Will I need to order a replacement motor then?
     
    #5 Jonathan Harrell, Jan 5, 2015
  6. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,406
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Wow, a new one MSRP is $231.58. Online prices for them are at $167.06 at camelback toyota.

    Both sides are not working?

    Here is the troubleshooting table....just in case it's not the motor.
     

    Attached Files:

    #6 JC91006, Jan 5, 2015
    Last edited by a moderator: Jan 6, 2015
  7. Jonathan Harrell

    Jonathan Harrell New Member

    Joined:
    Jan 5, 2015
    4
    0
    0
    Vehicle:
    2007 Prius
    Model:
    II
    Well once I took everything apart, I found that the assembly that ties the wiper arms to the motor was disconnected and the spring had flown off. The hardest part was getting that spring back on. But about 45 minutes totaled and they are working again. Thanks for your help.
     
    #7 Jonathan Harrell, Jan 6, 2015
(You must log in or sign up to post here.)