1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Coolant recovery wiring

Discussion in 'Gen 2 Prius Technical Discussion' started by Cory151, Jul 9, 2015.

  1. Cory151

    Cory151 Member

    Joined:
    Mar 3, 2012
    102
    27
    0
    Location:
    Las Vegas
    Vehicle:
    2005 Prius
    Model:
    Two
    Hey gang I was replacing a fender liner that was damaged from running over a box when I noticed there was some shoddily repaired wiring on the coolant recovery tank. Does anybody know what this green wire hooks to?
     

    Attached Files:

    #1 Cory151, Jul 9, 2015
  2. Cory151

    Cory151 Member

    Joined:
    Mar 3, 2012
    102
    27
    0
    Location:
    Las Vegas
    Vehicle:
    2005 Prius
    Model:
    Two
    Looks like the green one and the white one with a black stripe have been cut. I notice that on this particular car when I power off I do not hear the pump run like my others. Is this why? I soldered the connections and heat shrank them as they were just twisted together and taped.

    Unfortunetly I'm without another Prius to compare the wiring to, at this time.
     
    #2 Cory151, Jul 9, 2015
    Last edited: Jul 9, 2015
  3. Cory151

    Cory151 Member

    Joined:
    Mar 3, 2012
    102
    27
    0
    Location:
    Las Vegas
    Vehicle:
    2005 Prius
    Model:
    Two
    I tested the pump by applying 12v from an external source and it seems to work just fine.
     
    #3 Cory151, Jul 9, 2015
  4. Britprius

    Britprius Senior Member

    Joined:
    Jun 14, 2010
    5,194
    1,912
    0
    Location:
    Herefordshire England
    Vehicle:
    2008 Prius
    Does this help. Top right hand corner. Engine Controls 2of4.jpg

    John
     
    #4 Britprius, Jul 11, 2015
(You must log in or sign up to post here.)