1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Suction Cup Mount

Discussion in 'Prius c Accessories and Modifications' started by estrda1, Sep 12, 2015.

  1. estrda1

    estrda1 Junior Member

    Joined:
    Aug 26, 2015
    7
    2
    0
    Location:
    SoCal
    Vehicle:
    2015 Prius c
    Model:
    Four
    So I have been trying to find an ideal mounting location for my iottie easy one touch 2 and have had no luck. I currently have it below the AC controls but would like to secure it with something stronger like screws. The doublesided 3M tape I bought at hardware store only lasted 1 week after it started to come off. Is there anything I might damage if I screw in this area? As you can see there is a seam in the area I have it in and the 3M tape doesn't seem to be working. I would like to screw in a plastic disc in this area and mount the suction cup to the disk. I would need a larger diameter disk to allow a good seal with the suction cup and the disk and not have screws get in the way. Is this possible? uploadfromtaptalk1442096583422.jpg uploadfromtaptalk1442096599337.jpg

    SM-G900V ?
     
    #1 estrda1, Sep 12, 2015
  2. DKTVAV

    DKTVAV Active Member

    Joined:
    Jun 3, 2012
    510
    101
    0
    Vehicle:
    2012 Prius c
    Model:
    Four
    I have iOttie Easy One Touch XL (can hold a little bit wider phone than Touch 2) for my iPhone 6 Plus and mount it on the dashboard on the left side with no problem of coming off for more than three years. May be from a little help of the sun shade I bought from here and tinted windows all around keep stuffs in my car cooler: limo on back and rear, 15% on front and 70% on windshield.
     
    #2 DKTVAV, Sep 12, 2015
  3. djdawn

    djdawn Active Member

    Joined:
    Aug 17, 2014
    255
    116
    0
    Location:
    Escondido, CA
    Vehicle:
    2014 Prius c
    Model:
    Two
    That space behind where you circled is mostly empty on my pc2. I used that space to tuck away all my relays and wires for the rear camera.
    Why not drill into the area to the left of the 12v socket? that way you don't drill into that top trim and make it difficult in case you want to get behind the AC controls.
     
    #3 djdawn, Sep 14, 2015
  4. estrda1

    estrda1 Junior Member

    Joined:
    Aug 26, 2015
    7
    2
    0
    Location:
    SoCal
    Vehicle:
    2015 Prius c
    Model:
    Four
    So I ended up using a 2 tube epoxy and that seems to be working great right now. It looked like it fused both plastics together so I don't have to worry about screws anymore. I'll update in a few weeks and see how it's holding up. Heads up though if you want to try this, the fumes are strong so be prepared to leave the windows down to air out for a few hours.
     
    #4 estrda1, Sep 16, 2015
  5. estrda1

    estrda1 Junior Member

    Joined:
    Aug 26, 2015
    7
    2
    0
    Location:
    SoCal
    Vehicle:
    2015 Prius c
    Model:
    Four
    It's been about two weeks now and my epoxy method is still solid. On a side note I decided to test fit out a proclip mount I had for an Audi and it fit just as solid in the Prius, no drilling or glue it just clips in. I like the position of the iOttie because I can manipulate the phone and apps with my elbow resting on the armrest but I do have to glance down to see directions while driving and other stuff. The proclip I was using in my Audi has an integrated charger with it so all I have to do is drop it in the cradle and it's getting juice vs the iOttie I have to manually connect/disconnect each time. The proclip is also a little higher so it's easier too see stuff on the screen when driving. I'll be testing both out a little longer and see which one I stick with. [​IMG][​IMG][​IMG]


    iPhone ?
     
    #5 estrda1, Sep 27, 2015
  6. djdawn

    djdawn Active Member

    Joined:
    Aug 17, 2014
    255
    116
    0
    Location:
    Escondido, CA
    Vehicle:
    2014 Prius c
    Model:
    Two
    Do you have any more pics of that proclip mount and how you got it to work on your C? Also, for what model Audo was that proclip for? I might consider doing the same idea for the wife's passenger side.
     
    #6 djdawn, Sep 27, 2015
  7. estrda1

    estrda1 Junior Member

    Joined:
    Aug 26, 2015
    7
    2
    0
    Location:
    SoCal
    Vehicle:
    2015 Prius c
    Model:
    Four
    It was for a 2011 a4. Here's some more pics...[​IMG][​IMG][​IMG][​IMG][​IMG]


    iPhone ?
     
    #7 estrda1, Sep 27, 2015
  8. priusc3

    priusc3 Junior Member

    Joined:
    Sep 5, 2015
    10
    0
    0
    Location:
    Greater LA
    Vehicle:
    2015 Prius c
    Model:
    Three
    I reused my previous car gps's suction mount & placed it below hazard light.
     

    Attached Files:

    #8 priusc3, Oct 2, 2015
  9. Masterloc

    Masterloc Junior Member

    Joined:
    Jun 2, 2015
    53
    11
    0
    Location:
    New York
    Vehicle:
    2015 Prius c
    Model:
    Three
    had mines on the flat part on top of the vents. have a iottie too. and these suckers sticks to anything.
     
    #9 Masterloc, Apr 7, 2016
  10. fuesty11

    fuesty11 Junior Member

    Joined:
    Jun 17, 2011
    7
    2
    0
    Location:
    Bay Area
    Vehicle:
    2011 Prius
    Model:
    I
    looks good! (y)
     
    #10 fuesty11, Apr 17, 2016
(You must log in or sign up to post here.)