1. Attachments are working again! Check out this thread for more details and to report any other bugs.

I have a pre 4.0 scangauge will it work on 2015 C?

Discussion in 'Prius c Accessories and Modifications' started by priustexasbob, Dec 28, 2015.

  1. priustexasbob

    priustexasbob Member

    Joined:
    Sep 3, 2010
    356
    86
    0
    Location:
    arrakis
    Vehicle:
    2015 Prius c
    Model:
    Two
    I found my old scangauge, pre 4.0 firmware. will it work on my 2015 C or should I send it into have the firmware updated?
     
    #1 priustexasbob, Dec 28, 2015
  2. vskid3

    vskid3 Active Member

    Joined:
    Jun 23, 2013
    773
    228
    0
    Location:
    Texas
    Vehicle:
    2005 Prius
    Why not just try it? The basics should work fine, it's the xgauges that might give you problems. Also, make sure it turns off. Don't want to go out to a dead battery the next morning.
     
    #2 vskid3, Dec 28, 2015
  3. WilDavis

    WilDavis Senior Member

    Joined:
    Feb 4, 2014
    2,489
    2,153
    49
    Location:
    Top RH Corner of RH Coast on L side of The Pond
    Vehicle:
    2009 Prius
    Model:
    II
    …you might consider calling the ScanGauge guys to ask about an upgrade! I bought my second SG-II from eBay, and found it was an earlier firmware version, they (ScanGauge guys) sent me the latest firmware (new board, plus installation instructions) free and no charge! (…thanks guys!) :)
     
    #3 WilDavis, Dec 28, 2015
  4. Sean Nelson

    Sean Nelson Active Member

    Joined:
    Dec 30, 2014
    421
    182
    0
    Location:
    Vancouver, BC Canada
    Vehicle:
    2012 Prius c
    How do you know if it's off or not?
     
    #4 Sean Nelson, Dec 28, 2015
  5. Dave14Prius

    Dave14Prius Member

    Joined:
    Jun 2, 2014
    72
    26
    0
    Location:
    NE Missouri
    Vehicle:
    2014 Prius
    Model:
    Two
    The screen goes dark
     
    #5 Dave14Prius, Dec 28, 2015
  6. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,848
    3,102
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    There's two modes on the scangauge for sensing when to turn gauge off, 0 RPM and NO COM. Make sure you set up the scangauge to hybrid and make sure it isn't set to turn off when zero RPM is sensed, but when no communication through the OBDII port is detected.
     
    #6 xliderider, Dec 28, 2015
    Dave14Prius and vskid3 like this.
  7. Sean Nelson

    Sean Nelson Active Member

    Joined:
    Dec 30, 2014
    421
    182
    0
    Location:
    Vancouver, BC Canada
    Vehicle:
    2012 Prius c
    Got it, thanks!
     
    #7 Sean Nelson, Dec 29, 2015
  8. priustexasbob

    priustexasbob Member

    Joined:
    Sep 3, 2010
    356
    86
    0
    Location:
    arrakis
    Vehicle:
    2015 Prius c
    Model:
    Two
    thanks for the reply's, I wanted to check first to make sure it wouldn't do anything odd.
     
    #8 priustexasbob, Dec 29, 2015
  9. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,848
    3,102
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    If you have it registered with linear logic you can send it in for an update. Email them, you might be able to update it regardless.
     
    #9 xliderider, Dec 29, 2015
  10. priustexasbob

    priustexasbob Member

    Joined:
    Sep 3, 2010
    356
    86
    0
    Location:
    arrakis
    Vehicle:
    2015 Prius c
    Model:
    Two
    I did plug it in and it works just fine. so much disinformation on the internet *** gasp *** one site said it would not work and might even damage the car. ???? huh???
     
    #10 priustexasbob, Dec 30, 2015
(You must log in or sign up to post here.)