1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Plugin Connection Cable

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by mark1154, Jan 15, 2016.

  1. mark1154

    mark1154 Junior Member

    Joined:
    Aug 6, 2008
    28
    0
    0
    Location:
    Maryland
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    We have a 2013 Plugin and are currently on vacation. The car is not under cover and we're using a vacation house receptacle to connect. It is raining heavily and I'm wondering if the connection point will become dangerous if it gets wet. Also, it has become increasingly difficult to plug the connector in. We have to force it in with continued pressure. Suggestions/Answers?
     
    #1 mark1154, Jan 15, 2016
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,688
    48,943
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    no, rain will not harm it. i have charged in pouring rain and snow, it was designed for that.

    as for insertion difficulty, look into the handle end, and you should see a gasket out od place. just pull it out and disgard it, it is not needed, and has become an obstacle.
     
    #2 bisco, Jan 15, 2016
  3. mrbigh

    mrbigh Prius Absolutum Dominium

    Joined:
    Sep 6, 2005
    3,686
    699
    2
    Location:
    Long Island, NY
    Vehicle:
    Other Electric Vehicle
    with certainty, the orange internal "Ö"ring of the EVSE wand, is dislodged. It can be discarded.
     
    #3 mrbigh, Jan 15, 2016
  4. mark1154

    mark1154 Junior Member

    Joined:
    Aug 6, 2008
    28
    0
    0
    Location:
    Maryland
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    Wow! You nailed it! I've removed it but just to be safe and sure will that removal affect the safety of the plugin connection? Should I buy another "O" ring?
     
    #4 mark1154, Jan 15, 2016
  5. mrbigh

    mrbigh Prius Absolutum Dominium

    Joined:
    Sep 6, 2005
    3,686
    699
    2
    Location:
    Long Island, NY
    Vehicle:
    Other Electric Vehicle
    You could replace it with a new OEM one but for the experience of sooo many here in PC that had done the same, me included, it is not necessary.( we can live with out it)
    What happens is the following, the natural "O" ring material slickness dries out and gets drag out of place at removal time and them some
     
    #5 mrbigh, Jan 15, 2016
  6. mmmodem

    mmmodem Senior Taste Tester

    Joined:
    Nov 17, 2011
    2,732
    1,703
    0
    Location:
    Bay Area, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Been plugging in the rain for the last 3 years, no issues. It's designed for that. Last night after work came to my car unplugged it and the battery was empty. Charge cable was blinking red. Pissed me off.

    But it just occurred to me. Power was cutoff for a good reason. EVSE probably saved my life. That's why this glorified extension cord costs $1000.
     
    #6 mmmodem, Jan 15, 2016
    mrbigh likes this.
(You must log in or sign up to post here.)